680 reviews analysed
1. Amarine Made 12v Scavenge Impellor Pump- for Diesel Fuel Scavenge Oil Transfer – White Shell
Feature
- Self-priming gear electric pumps suitable for lubricants and viscous liquids
- Rugged bronze body and stainless steel shaft, Easy connecting system, Soft rubber mounts
- Can be used to transfer diesel, lubricants, & machinery fuel (except gasoline petroleum fuel), Includes 2 x 12mm (1/2″) brass hose tails
- Professional grade pump – Ideal for marine, caravans/RV, automotive and agriculture applications
- Designed for intermittent use only. Duty cycle: 30 mins
Description
Specifications
Voltage: 12V DC
Flow capacity: 14 Litres per minute (3.7 Gallons per minute)
Self-priming – Max. lift 3M
Rugged bronze body and stainless steel shaft
Can be mounted in any position
Includes 2 x 12mm (1/2″) brass hose tails Twin core wire Current Draw: 7 Amp (max. 10 Amp) Dimensions: Length 155.5mm x Width 119mm x Height 103mm
Approvals: CE
Turbocharger oil scavenging has always been an issue. You might have 50 psi feeding the turbo but the slightest restriction in the “drain” will immediately send oil past the exhaust seals, burning up oil and ruining your turbo.
In the case of remote mounted turbo systems, rear mounted systems, or in systems mounted below the engine oil level, some form of positive scavenging has to be engineered. That is where this pump comes into play.
This pump is a gear pump, the best kind of pump for oil scavenging.
Bronze gears. Brass pump body. No diaphragms to fail like our competitors pumps.
Gear design for maximum scavenge.
12v DC with splash resistant wiring. Two 1/2″ barbed fitting included.
The same oil that it scavenges also lubes up its gears.
This is a racing part, please do not expect the product to be quiet.
These pumps are suitable for remote turbo systems as oil scavenge pumps. In this case the engine supplies
the oil pressure and the pump simply returns the turbo oil to a point above the sump level.
Can also be used for various other applications. (Oil transfer, etc)
2. StaiBC 12V Electric Fuel Pump Diesel Petrol 12 Volt
Description
Description: 12V Electric Fuel Pump Diesel Petrol 12 Volt Features: Lightweight and small size. Easy to fit and connect.(2 bolt fixing , 2 wire design.) Tubing Interface 8mm Plug in connector Specification: Installation hole distance :6.7CM Flows: 90L / H Currents: 1.3-1.4A Voltage: 12V Pressure : 0.3-0 .5 MPA Tubing Interface: 8mm Using a plunger-type of fuel supply way, suction stronger,oil supply more stable Package included: 1X Fuel Pump
3. GasTapper 12V Gasoline Transfer Pump/Siphon UTV’s, Boats, Equipment, Vehicles, Gas, Diesel – Click at top of This Page for Full Store
Feature
- Dry lift and siphon gas from most vehicles, boats & equipment – See all 5 by clicking on blue lettered “GasTapper” at top of page
- Weather resistant air-tight, fume proof case with pressure release valve so that you can store it safely in a vehicle
- 12V case-mounted Automotive grade (7-10 PSI) high-lift pump with LED power indicator and plug for cord disconnect
- (2) 8’ coils of 3/8” FuelFlex 65, 6′ 1/4 line, fuel filter, 12V auto pwr plug, in-line switch 15′ 12V cord
- 2014 SEMA new products award winner! Built in the USA with US and imported parts
4. Goplus Electric Fuel Pump 12V 10GPM Diesel Bio Kerosene Oil Transfer Extractor
Feature
- 【Powerful Motor】Equipped with the strong motor and adopting continuous working principle, the electric fuel pump will do a good help when you pump. The flow rate can up to 40(L/Min) / 10GPM. And No-load speed is 4500r/min. It is for fast and convenient fuel pumping.
- 【Safety Assurance】 This oil pump is made of premium materials which can be used for a long time. Speed range is 3500 RPM for use. It has also been tested and passed through a strict performance test for temperature resistance and anti-shock with a high quality protection rating of IP55.
- 【Portable and Lightweight Pump】The weight of this pump is only 8 lbs, and inlet/ outlet port fitting suits 3/4″. Due to its compact size and the handle grip, this fuel pump is very portable to carry. You can freely use it wherever you want to use.
- 【Suitable for Different Use】The max suction is 5m. For the long lift distance 10m, this professional diesel pump can be widely used in automobile manufacturing, power, chemical, engineering machinery, vehicle maintenance workshop, oil change center and other industries.
- 【Something You Should Pay Attention to】The package includes 1 x diesel pump. Note: The oil pump is suitable for diesel, biodiesel, and kerosene only. Not suitable for low flammability fuel (such as gasoline, liquefied petroleum gas, alcohol, etc.)
5. Hayden Automotive 405 Ultra-Cool Tube and Fin Transmission Cooler
Description
ULTRA COOL TRANSMISSION OIL COOLER, UNIVERSAL — 3/4″ Thick, 10″ Height, 15 7/8″ Length, 3/8″ Push-on Fitting Size, Ideal For Vehicles Up To “A” Class Motor Homes, Towing Up To 5000 Lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer
6. Duda Energy HPpvc100-025ft 25′ x 1" ID High Pressure Braided Clear Flexible PVC Tubing Heavy Duty UV Chemical Resistant Vinyl Hose Water Oil
Description
PVC tubing is a polyvinyl chloride plastic with plasticizers to make it more flexible and transparent. The braided design helps reinforce the strength of the hose. The hose is non-toxic. Popular for many applications. The hose is not FDA approved for use with foods.
7. CarBole Universal Micro Electric Fuel Pump fuel Transfer Pump 35GPH 4-7 PSI Diesel Only
Feature
- Great for carbureted applications on most 4, 6 and 8 cylinder vehicles
- Internal Pressure Regulator. Includes 100 Micron Filter
- Solid-State Worry Free Electronics,Must Be Mounted Within 12″ Of Tank
- 5/16″ Hose Barbs,operating fuel pressure: 4-7 P.S.I.(Diesel)
- Voltage: 12V
- Flows: 35(GPH)
- 100% quality guarantee.Free return back if there is any quality issue
Description
100% calibrated shut-off pressure
Quiet operation & Dependable construction .
CarBole’s every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance .
Technical features:
Flows: 35(GPH)at most.
Currents: 1-2A
Voltage: 12V
Shut off pressure: 4-7 P.S.I.
Inlet and Outlet diameter: 5/16 inch
Package Include:
1. Micro external pump*1
Fittings(includes 100 micron in line filter)*2
Bolts*2
Notes:
Forbid to pump the water, alchol and the fuel contains many impurities.
Please check the pumps shut off pressure in our description, make sure it is your best choice.
Pumps require approximately one amp average draw at maximum delivery.
8. Gneral Filter 2A-700B Galvanized Steel Fuel Oil Filter, 3/8"
Description
Fuel filter, for oil fire heating appliances, 3/8 inch NPT, 12 psi firing rate, 25 gph, UL listed. The product is manufactured in china. Easy installation and easy handling.
9. CarBole Universal Electric Fuel Pump 5/16 inch Inlet and Outlet 132LPH(4-7 psi)
Description
Part Type:Fuel Pumps, Electric External
Product Line: Micro Electronic Fuel Pumps
Free Flow Rate:35 gph/132 lph
Maximum Pressure (psi):7 psi
Inlet Size:5/16 in.
Inlet Quantity:One
Inlet Attachment:Female threads
Outlet Size:5/16 in.
Outlet Quantity:One
Outlet Attachment:Female threads
Notes:The inlet hose barb screws into the pump housing with 1/8 in. NPT threads
Five Fuel Pump Tips
First: Make sure that you use a quality TIER 1 FUEL.
Second: Remember that the fuel pump is an electrical motor, and that it heats up. The manufacturers have put the fuel pump in the fuel tank so that it can remain cool, try to never run the fuel level down below a half tank. This insures that the pump will stay immersed all the times.
Third: Never get fuel if the station is getting fuel at the same time. All of the dirt and deposits are be stirred up and the gasoline pump filters can never catch it all.
Fourth: If your vehicle has a fuel filter that is not in the tank, change it yearly, regardless of how many miles that may have on the vehicle.
Fifth: If you are not burning a tank of fuel every week to 2 weeks make sure that you add an anti-ethanol agent so that the fuel does not jell. This fuel separation is the single most cause of fuel pump and injector failure.
10. Design Engineering 010405 Heat Shroud 1/2" – 1-1/4" I.D. x 3ft Aluminized Sleeving for Ultimate Heat Protection (with Hook and Loop Closure)
Description
The DEI Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close the edges.
Conclusion
By our suggestions above, we hope that you can found 38 Home Heating Fuel Oil Line for you.Please don’t forget to share your experience by comment in this post. Thank you!