808 reviews analysed
1. LED Light Push Button Switch with Connector Wire Blue Backlit Kit for Toyota Tundra Tacoma 4Runner-Rear Light Symbol
Feature
- Fitment: This Rear Light Push Switch fit Toyota Tacoma Tundra 4Runner Highlander Sequoia RAV4.
- Sturdy Material: The push switch made of ABS high strength plastic, long service time.
- Easy Install:must be wired through a fused relay,Direct fit your car board dash.
- Feature:surface size: 1.28in x0.87in
- Black finish, blue laser image. Voltage: 3Amp 12V.
- Easy Install: Direct Replace OEM switch, must be wired through a fused relay.
Description
Feature:
* Surface Size: 1.28in x0.87in;
* Voltage: 3Amp 12V;
* Material: ABS plastic;
* Blue Backlift laser feature;
* Direct Replace OEM switch;
* Easy Install: must be wired through a fused relay.
Fitment List:
*Toyota Sequoia 2008-2019
*Toyota Highlander 2008-2019
*Toyota Tacoma 2012-2019 Center ONLY
*Toyota Tundra 2008-2019
*Toyota 4Runner 2010-2019
*Toyota RAV4 2008-2012
*Toyota Yaris 2008
Package Include:
1* Push Switch
1*install instruction
2. iJDMTOY (1) Factory Style 4-Pole 12V Push Button Switch w/LED Background Indicator Lights For Fog Lights, DRL, LED Light Bar, etc (200 Series For Toyota, 33x22mm)
Feature
- Toyota OEM style light switch (200 series, 33 x 22mm)
- Upper light is active when power is on, and lower light is active when dash light is on
- Good for many Toyota, Lexus and Scion vehicles such as 2006-2011 RAV4, 2008-2017 Land Cruiser, 2015-up Prado, 2015-up Hilux, 2011-2014 Camry, 2006-2013 Corolla, 2012-2014 Tacoma, 2007-2014 Tundra, 2003-2009 4Runner, etc
- Perfect for adding fog lights, LED light bars, daytime running lights, strobe lights, etc
- This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
Warning: Before buying this product, please double check your vehicle’s original switch opening sizes.
This page features the 4-Pole 12V push button switch with LED background indicator lights. The push button switch fits many Toyota cars, truck, and SUVs such as 2006-2011 RAV4, 2011-2014 Camry, 2012-2014 Tacoma etc. This makes an ideal switch for any installed LED light product like LED light bars, daytime running lights, fog lights, etc. When in use, the upper light is active when the power is on, and the lower light is active when the dash light is on.
3. MICTUNING LED Push Button Switch with Connector Wire Kit for Toyota – Red Laser LED LIGHT BAR Symbol
Feature
- PERFCT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life (This one is Red. Blue,White & Green avaiable)
- STURDY DURABILITY – Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54″ x 0.83″
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install
- WIDE APPLICATION – This model fits on LATE model Toyota’s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. A SMALLER MODEL available which fits some other LATEST Toyota vehicles, Sequoia 2008-2014, Highlander 2008-2014, Tacoma 2012-2014 Center ONLY, Tundra 2007-2014, RAV4 2008-2012, 4Runner 2010-2014, Prado 150 Series 2010-2014, Land Cruiser 200 Series 2008-2013, Corolla 2006-2013, Camry 2011-2014 etc. If you need a smaller model, please send us
Description
MICTUNING Customized Laser Etched Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.54″ x 0.83″ and all symbols are Laser Etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009
4. MICTUNING Backlit FOG LIGHTS Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (Blue, Surface Size 1.28 x 0.87 inches)
Feature
- PERFECT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
- STURDY DURABILITY – The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28″ x 0.87″. It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay
- the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
- WIDE APPLICATION – The switch fits on most model Toyota¡¯s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE VEHICLES: # Toyota Sequoia 2008-ON, # Toyota Highlander 2008-ON, # Toyota Tacoma 2012-ON (Center ONLY), # Toyota Tundra 2008-ON, # Toyota 4Runner 2010-ON, # Toyota RAV4 2008-2012, # Toyota Yaris 2008
5. MICTUNING [New] LED Push Button Switch with Connector Wire Kit for Toyota – White Laser Etched LED LIGHT BAR Symbol
Feature
- PERFCT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life
- STURDY DURABILITY – Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.28″ x 0.87″
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install
- WIDE APPLICATION – This model fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008
Description
MICTUNING Customized Laser Etched Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.28″ x 0.87″ and all symbols are Laser Etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota Sequoia 2008-ON
# Toyota Highlander 2008-ON
# Toyota Tacoma 2012-ON Center ONLY
# Toyota Tundra 2008-ON
# Toyota 4Runner 2010-ON
# Toyota RAV4 2008-2012
# Toyota Yaris 2008
6. MICTUNING LED Push Switch with Connector Wire Kit for Toyota – White FOG LIGHTS Symbol
Feature
- PERFCT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck
- HIGH QUALITY – Etched directly onto the switch face using modern high tech engraving equipment to ensure long image life (This one is White. Blue & Green avaiable)
- STURDY DURABILITY – Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54″ x 0.83″
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install
- WIDE APPLICATION – This model fits on LATE model Toyota’s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. Thank you!
Description
MICTUNING Customized Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.54″ x 0.83″ and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009
7. MNJ Motor Blue LED Light BAR Symbol Push Button Switch with Connector Wire Kit Replacement for Toyota (Surface Size 1.28 x 0.87 inches)
Feature
- ★ PERFECT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
- ★ SUPREME QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
- ★ STURDY DURABILITY – The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28″ x 0.87″. It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
- ★ EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay
- the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
- ★ WIDE APPLICATION – This model fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008
Description
MNJ Motor Customized Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.28″ x 0.87″ and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MNJ MOTOR New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota Sequoia 2008-ON
# Toyota Highlander 2008-ON
# Toyota Tacoma 2012-ON Center ONLY
# Toyota Tundra 2008-ON
# Toyota 4Runner 2010-ON
# Toyota RAV4 2008-2012
# Toyota Yaris 2008
8. LED Light Push Switch Blue Backlit On/Off for 2010-2019 Toyota Tacoma Tundra 4Runner-Rear Light Symbol
Feature
- Fitment:This push switch fit 2010-2019 Tacoma Tundra 4Runner FJ Cruiser Hilux Highlander Land Cruiser.
- Sturdy Material:The push switch made of ABS high strength plastic,long service time.
- Easy Install:must be wired through a fused relay,Direct fit your car board dash.
- Feature:surface size:1.28in x0.87in
- Black finish,blue laser image. Voltage:3Amp 12V.
- Easy Install:Direct Replace OEM switch,must be wired through a fused relay.
Description
Feature:
* Surface Size:1.28in x0.87in;
* Voltage:3Amp 12V;
* Material:ABS plastic;
* Blue Backlift laser feature;
* Direct Replace OEM switch;
* Easy Install:must be wired through a fused relay.
Fitment List:
*Toyota Sequoia 2008-ON
*Toyota Highlander 2008-ON
*Toyota Tacoma 2012-ON Center ONLY
*Toyota Tundra 2008-ON
*Toyota 4Runner 2010-ON
*Toyota RAV4 2008-2012
*Toyota Yaris 2008
Package Include:
1* Push Switch
1*install instruction
9. Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V
Feature
- ➤Upgraded Two-Line Design – Longer wires, suitable for any model cars. The lights tape’s back come with strong 3M adhesive, two lines connect with four strip lights, no need assemble the strip light, more easy to install and hide, keep your car clean and tidy. This cigarette lighter plug has switch and indicator light, built-in fuse, effectively protect the vehicle lights.
- ➤Two Simple Control Methods – Forget the remote what easy to lose, we provide a more convenient and fashion controller, enjoy to change the color, brightness, music mode. And you can stick the controller on the nearby next you for safety drive. What’s more, you can use the “Govee Home” APP to control the light.
- ➤Music Sensor – Built-in high sensitivity mic, spectrum with light and colors adjusting automatically base on the ambient sound, and then the led lights will change their colors following the music rhythm, increase safety of driving in daytime and nighttime.
- ➤Multi-Colors – Come with RGB car LED strip, Infinitely DIY colors over 16 million colors and different tones for selection, you can customize your own unique color modes to perfect enhancement for upgrading your car.
- ➤Safe to Use – Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function. Waterproof, extremely low-heat, touchable and safety for children.
10. Car Charger, Ainope 4.8A Aluminum Alloy Car Charger Adapter Dual USB Port Fast Car Charging Mini Flush Fit Compatible iPhone Xs max/x/7/6s, iPad Air 2/Mini 3, Note 9/Note 8/Galaxy S9/S8 – Black
Feature
- [Compact Size] With tiny thumb-sized(Size: 1.7inch*0.9inch) body, it perfectly blends with most car cigarette lighter and sits comfortably with the edge of the outlet. Our smallest car charger yet
- it´s portable and you can take everywhere. ( Please kindly know our mini car charger perfectly blends with most car cigarette lighter. However, some of the car cigarette lighter is short, so part of our car charger may protrude a little from the cigarette lighter.)
- [Efficient Charging] Charge two devices simultaneously at full speed with 2.4A in each USB port. With a total power of 4.8A, it works for all USB-powered devices.【Please note: The charger is not QC3.0 which doesn’t support Qualcomm Quick Charge】
- [All Metal Material] The full aluminum alloy body features scratch resistant, nice in design and long-lasting in use. High quality aluminum material let your car charger always look like new. Upgrade metal car charger will not be overheating at high temperatures, which is safer than plastic one.
- [Safety Guarantee] It has CE, FCC, UL & RoHS certifications and multiple protection against over-current, overcharging, overheating and high temperature will guard the safety of your devices.
- [Worry-Free Warranty] With 12 months manufacturer 100% money back guarantee. Welcome to contact us if you have any questions or concerns. Our reliable Customer Service will be sure to reply within 24 hours and offer proper solutions for you.
Conclusion
By our suggestions above, we hope that you can found Tundra Dash Switch Buttons for you.Please don’t forget to share your experience by comment in this post. Thank you!