
Finding your suitable readers for thermostat for cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for thermostat for cooling including detail information and customer reviews. Let’s find out which is your favorite one.
566 reviews analysed
1. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
Feature
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Description
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
2. KING K101-C Bi-Metal Cooling Line Voltage Thermostat, 1-Pole, White
Feature
- For line voltage cooling applications. No ground wire design
- Accuracy: +/- 3F. Includes c and f control dials. Bi-metal sensing element
- Etl listed. mounts directly to a 2×4 inch vertical electrical outlet box
- Large knob allows easy adjustment to all temperatures. Single pole, operates 41 degree – 90 degree f (3 degree- 32 degree)
- Fully vented cover allows air sensing in all directions
Description
The k101-c cooling thermostat: the k101-c cooling thermostat has a larger, more sensitive, bi-metal sensor that improves temperature accuracy to 3 degree f. This feature achieves a better comfort level with a reduced temperature swing as compared to economy models. Modem appearance with large knob for easy adjustments. No ground wire, making installation fast and easy. For cooling only.
3. Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)
Feature
- PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃).
- SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature.
- INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible.
- EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD.
- SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater.
4. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. Line Voltage Mechanical Thermostat, Heating/Cooling, 120 to 277VAC
6. Lux Products TX9600TS Programmable Large Touchscreen Heating Cooling Thermostat, White
Feature
- Universal compatibility for all system types. Large, lighted easy-to-read touchscreen display. It is compatible with virtually all North American heating and cooling systems apart from systems with electric baseboard heat (120 or 240 volt) and systems with 2-cooling stages
- Biggest size display, Easy-to-use touchscreen menu operation.
- User-selectable periods per day (2 or 4), Programmable touch pad lockout for unauthorized users
- Adjustable heat/cool set temperature limit stops, Energy usage monitor. Refer user manual below
- Programmable air filter life timer, Temporary temperature override, Adjustable temperature differential (swing).
Description
About the lux TX9600TS Thermostat, 7 day digital programmable universal touch screen The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is simple and easy to understand making it extremely user friendly. This thermostat provides you with complete and accurate temperature control with just a simple touch of your finger. The lux TX9600TS features a large digital lighted display that makes the touch screen easy to read and program (7 day programming available). The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is designed for use with most 24 volt heating and A/C systems, two stage heat/ one stage cool (gas, oil, Electric, or single stage heat pump systems, two wire heat only hydronic systems (hot water baseboard & Radiator) and millivolt systems (wall heaters, furnaces & Gas fireplaces). The lux TX9600TS is not designed for use with electric baseboard heat (120\240 volt) and systems with 2-cooling stages.
7. Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
Feature
- REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCC
- SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
- MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
- EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
- WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
8. Dayton 6EDY5 Line Voltage Thermostat, 120-240V, SPDT
9. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Conclusion
By our suggestions above, we hope that you can found Thermostat For Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!