We spent many hours on research to finding temperature controller heating cooling 20 amp, reading product features, product specifications for this guide. For those of you who wish to the best temperature controller heating cooling 20 amp, you should not miss this article. temperature controller heating cooling 20 amp coming in a variety of types but also different price range. The following is the top 10 temperature controller heating cooling 20 amp by our suggestions
698 reviews analysed
1. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
2. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
3. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
4. W3230 Digital Temperature Controller -50 to 110 °C Programmable Heating Cooling Thermostat Control Switch Module DC 12V 20A LED Display Thermostat Regulator Switch Sensor Meter Waterproof NTC Probe
- ❃❃ The mini temperature controler can both make heating and cooling contral, temperature measuring range: -50°C-110°C.
- ❃❃ Red + Blue 2 color display makes it easy for distinguish and more convenience for better readability.
- ❃❃ Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
- ❃❃ Safe and Reliable: Relay output. All parameters setting can be saved after short circuit.
- ❃❃ Widely can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other small temperature-controlled system.
Power Supply: DC12V
Temperature Control Range: -50°C-110°C
Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)
Color of Displaying: red/blue
Measurement Accuracy: ±0.1°C
Control Accuracy: 0.1°C
Sensor: NTC10K Waterproof sensor
Environmental Requirements: -10-60°C , humidity 20%-85%RH
Dimension: Approx 79*43*26mm / 3.1*1.7*1.0″
1 * Temperature Controller, 1 * Waterproof Probe.
5. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
6. Inkbird °F and °C Display PID Stable Temperature Controller ITC-106VH (ITC-106VH + K + 40A SSR + Black Heat Sink)
- Equipped with dual LED display
- Offers display options of Centigrade and Fahrenheit
- Enabling more humanized temperature control
- High standard self-adjust function along with multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- It’s suitable for most applications, Sous Vide, Smoker, Brewing etc.
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
40A SSR SOLID STATE RELAY for temperature controller
Load Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V
1x Inkbird ITC-106VH Controller
1 x 40A SSR
1x Mounting bracket
1 x K sensor
1xBlack Heat Sink
7. 2PCS Temperature Controller Module with Case, XH W1209 Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ Electronic Temperature Temp Control Module Switch
- ✹✹ The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
- ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
- ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
- ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
- ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling(Note: If you meet any questions, pls contact us in time and we will help you.).
8. XpertMatic MH-2000 Digital Temperature Controller AC 110V-220V 10A, Freezer Thermostat Outlet Switch with Heating and Cooling Mode, for Aquarium, Greenhouse, Fermentation, Heater, Brewing, Incubator
- [Easy to Use] Plug and play, simple to program.
- [Easy Switching Between Dual Modes] Supports heating and cooling modes. Can Be Easily switched. Suitable for ac relay cooling and heating devices such as chest freezer, slow cooker, portable air conditioner, small space heater, heating lamp, etc.
- [Dual Display Windows] Simultaneous displays measured temperature and the set temperature at the same time. It has a wide temperature control range from -40℉ to 212℉.
- [Safe Use] With a compressor delay function, it helps to protect your refrigeration and heating equipment. Max output load is 2200W (220V, 10A).
- [Wide Range Of Uses] Can be used for home brewing, fermentation, breeding, making kombucha, and incubation. Widely used in the greenhouse, fermentation chamber, grow room, garage, reptile terrarium, aquarium, etc.
XpertMatic MH-2000 is an accurate digital temperature controller with a wide temperature control range from -40℉ to 212℉.
The temperature controller is able to connect with various heating/cooling equipment, and then work as a temperature control system.
Widely used in homebrewing, fermentation, breeding, making kombucha, and incubation, accelerating germination, etc.
A great digital temperature controller for multiple uses!
The power-on delay feature design to protect the value and in cases the on/off cycle occurs rapidly.
1 Socket for 2 temperature control modes. Designs in a compact size for convenient use.
The temperature measurement accuracy is ±0.3℉. You can keep the environment in your desired temperature range.
Working Voltage Range: AC 90V-250V ±10%，50/60Hz；
Relay Capacity: 10A/AC 220V; Power Consumption: ≤3W
Standby Power Consumption: ≤0.5W
Temperature Control Range: -40℉~212℉
Temperature Measurement Accuracy : ±0.3℉
Temperature Control Precision: 0.1℉
Slewing Range : 0.1℉~50℉(Adjustable) ; Temperature Resolution: 0.1℉
Temperature Sensor: NTC 77℉=10K B3435土1%(4.9ft )
Power Cable Length: 4.9ft
Working Environment Temperature: -30℉~150℉,
Humidity: 90%RH; (No Condensate)
Dimension: 6.1*2.4*1.1 in(L*W*H)
1 x MH-2000 Temperature Controller
1 x User Manual
9. PEMENOL Temperature Controller DC 12V Heating/Cooling Thermostat Control Switch Module -20℃ to + 100℃ Celsius Temp Display Board with Dual Relay Waterproof Sensor Probe for Brewing Ferment Greenhouse
- 【Dual Relay Output】2 10A relay keep the temperature within the set range through the heating and cooling thermostat
- 【Large Measurement Range】 Temperature range: -20°C~+100℃
- Input power: 12V
- Temperature measurement accuracy: 1 ℃
- Refresh rate: about 0.5s
- 【Clear Working State】 The relay is closed when the light is on, disconnected when the light is off. It has high temperature protection.
- 【NTC Temperature Sensor】 With a waterproof NTC (10K) temperature sensor probe, programmable heating/cooling mode.
- 【Widely Used】Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
10. Elitech STC-1000 Pro Digital Temperature Controller Thermostat US Socket, Two Pre-Wired Heating and Cooling Outlets, Centigrade/Fahrenheit LCD Display, Plug Sensor, 49°F-239°F 110V 100-250V 10A 1200W
- 【Upgraded Version of STC-1000】Its large LCD screen, simple 3-button, 2-relay output and pre-wired design, making it easier to be used by play and plug.
- 【Wide Temperature Range】It measures from -49℉～239℉ and starts cooling or heating according to configured parameter, which will allow it to keep desired temperature anytime.
- 【Multi-functional Setting】The functions include setting high or low alarms, protection time(cooling mode only), temperature calibration, ℃/℉ and etc.
- 【Safe & Reliable】The fireproof ABS case will be more safer when in use.
- 【A Variety of Use】This controller can be widely used under various scenarios and electric appliances that need automatic temperature controlling such as culture fermentation home brew, aquarium, incubation, pet breeding, seedling heat mats, etc. 24/7 US Technician Support via Email and Phone.
By our suggestions above, we hope that you can found Temperature Controller Heating Cooling 20 Amp for you.Please don’t forget to share your experience by comment in this post. Thank you!