Top 9 Raspberry Pi 3 Cooling Liquid

The Raspberry Pi Dual Fan Was Included the Thermal Conductive Adhesive.

1.Connecter of the Raspberry Pi Dual Fan: PH2.0-2P
2.Cable Length of the Raspberry Pi Dual Fan:8cm
3.Use For Raspberry Pi 3 Model B+
4.DC:5V 0.2A
5.Not included Raspberry Pi 3 Model B+ Motherboard
Packing included:
1.Raspberry pi Dual Fan
2.Black Aluminum Heatsink.
3.Copper Heatsink

Description:
The 52Pi New Colorful Ice Tower Cooler is inspired by the single-stack tower-style heatsink and fan (HSF) assemblies which dominate the desktop PC market. It includes thermal interface material (TIM) pads, mounting brackets and accessories for the Raspberry Pi 4 and Raspberry Pi 3 Model B/Model B+, a tiny screwdriver, and a small but full-color manual. new feature is using Compatible bracket and a color LED fan with automatic color change.
Features:
Color LED fan with automatic color change
Single-stack tower-style heatsink
DC 5V Power in (Can be powered by the Raspberry Pi)
5mm copper tube
Super heat dissipation
Rated power 0.4W @5V, 0.08A
Easy to setup
Acrylic protection panel
Plug and play

Package Includes
1 x Ice Tower Cooler
4 x M2.5×6+6 Copper Stick
4 x M2.5 Nuts
6 x M2.5×6 Screws
3 x Thermal Tape
1 x Screwdriver
1 x Mounting brackets pack (For 3B/3B+/4B)
1 x Acrylic protection panel
1 x Instructions

Raspberry Pi 3 B+ Dual Fan with Heatsink

Extreme Cooling Fan Kit For Raspberry Pi 3B+

Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.

Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes

Why design it?
According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex. Higher processing performance will generate more heat.
This super ICE Tower CPU Cooling Fan for Raspberry Pi is designed for solving heat dissipation problem!

Features:
The super cooling fan can be used for Raspberry Pi 3B+ and Raspberry Pi 4B.
Super heat dissipation: Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
The tower fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized. When the fan turns up, you will see the color of ice.
Easy to setup

Parameters:
DC 5V Power in (Can be powered by the Raspberry-Pi)
Rated power 0.4W 5V, 0.08A
background light : Blue Color

How to using it with Raspberry-Pi 3B+ and 4B?
1. Fixed the steel mounting fixer to radiator’s heat dissipation cube with M2.0 screws
2. Fixed the steel mounting fixer to Raspberry-Piâ€s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
3. Fixed the copper stick to Raspberry-Pi with M2.5 nuts.
4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Including:
1 * Ice Tower radiator and Fan
2 * Steel Mounting brackets
8 * M2.5×6 Copper sticks
4 * M2.5 Nuts
6 * M2.5×4 screws
3 * Thermal Tape
1 * Screw Driver
1 * Protective Acrylic Panel

Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)