Top 9 Primochill System Reboot Cooling Loop Treatment

0

We spent many hours on research to finding primochill system reboot – cooling loop treatment, reading product features, product specifications for this guide. For those of you who wish to the best primochill system reboot – cooling loop treatment, you should not miss this article. primochill system reboot – cooling loop treatment coming in a variety of types but also different price range. The following is the top 9 primochill system reboot – cooling loop treatment by our suggestions

555 reviews analysed
Rank
Product Name
Score

1. PrimoChill System Reboot – Cooling Loop Treatment

PrimoChill System Reboot - Cooling Loop Treatment

Feature

Description

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

  • Bottle Size: 15ml
  • Dosage: Mix with 1 Gallon of DI or distilled water
  • Shelf Life: 2 Years, Unopened
  • Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

    Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

    Instructions
    1.Double-check connections to ensure loop is “closed”. No Leaks!
    2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
    3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
    4.Start pump and begin circulating the treated solution.
    5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
    6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
    7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
    8.Drain system.**.
    9.Fill loop with your choice of coolant and begin water-cooling.
    ** Reboot needs to be flushed from the system until no foam is seen and water runs clear

    Warnings

  • Do not mix with any pre-mixed coolants.
  • PrimoChill is not responsible for any hardware damage. Use at your own risk.
  • 2. PrimoChill Water Cooling Cleaning Prep Kit – Existing System

    PrimoChill Water Cooling Cleaning Prep Kit - Existing System

    Feature

    3. PrimoChill Liquid Utopia – 15ml Bottle

    PrimoChill Liquid Utopia - 15ml Bottle

    Feature

    Description

    As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

    ********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
    Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
    Tyler Direct is not responsible for any hardware damage. Use at your own risk.

    4. PrimoChill SysPrep – Cooling Loop Pre-Treatment

    PrimoChill SysPrep - Cooling Loop Pre-Treatment

    Feature

    Description

    Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
    Specifications

  • Bottle Size: 15ml
  • Dosage: Mix with 1 Gallon of DI or distilled water
  • Shelf Life: 2 Years, Unopened
  • Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
    Instructions
    1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
    2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
    3.Add mix to cooling loop.
    4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
    5.Start loop pump and begin circulating the treated water.
    6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
    7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
    8.Fill loop with your choice of coolant and begin water-cooling.**

    ** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

    Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
    PrimoChill is not responsible for any hardware damage. Use at your own risk.

    5. PrimoChill True Infused – Insanely Concentrated Liquid Pre-Mix (8oz) – Blood Red

    PrimoChill True Infused - Insanely Concentrated Liquid Pre-Mix (8oz) - Blood Red

    Feature

    Description

    True is an environmentally friendly fill and forget coolant solution that alleviates stress and concern over possible leaks in your next computer watercooling system. It provides significant benefits of increased performance and aesthetics without the headaches. True delivers continuous protection against algae and corrosion and is safe for your PC components. Whether you’re new to watercooling, or a seasoned pro, True is the coolant for you .

    Bottle Size: 8 fluid ounces
    Shelf Life: 2 years (unopened)
    Mix Ratio: Add to 1 gallon Distilled Water
    Included:1x Sys Prep 15ml / 1x True 8oz

    Note:Primary pictures shows fluid mixed and in a reservoir (not included) to illustrate the final color.

    WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

    6. PrimoChill Rad Clean – Radiator Cleaning Treatment

    PrimoChill Rad Clean - Radiator Cleaning Treatment

    Feature

    Description

     The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “scrub” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!

    Features

    • Water Based
    • Concentrate – Just Add 1/2 bottle to 32oz of DI or distilled water
    • No special equipment (gloves, goggles) needed

      Specifications

      • Bottle Size: 2oz
      • Dosage: Mix 1/2 bottle with 32oz of DI or distilled water

      Compatibility Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible! Instructions

      For this pre-treatment to work correctly follow the instructions below. 
      Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
      Step 2: Fill radiator up with Radclean mixture
      Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
      Step 4:Let your radiator sit for one hour.
      Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
      Step 6:Drain radiator and let dry completely.

      Warnings Important to use plastic fittings when cleaning radiators while using Rad Clean!

      PrimoChill is not responsible for any hardware damage. Use at your own risk.

      7. PrimoChill Female to Female G 1/4 Drain Valve – SX Sky White

      PrimoChill Female to Female G 1/4 Drain Valve - SX Sky White

      Feature

      Description

      PrimoChill Female to Female G 1/4 Drain Ball Valve are the latest addition to a rapidly growing PrimoChill product line. The drain valves are very functional without sacrificing style. Each drain valve is carefully machined to specifications that enable the user to install a G 1/4 fitting at both ends resulting in a sealable connection that allows for an easy drainport or fillport location to be made.

      The unique design and ease of installation will be the perfect match for your next water cooling system.  These fittings can be used on the top of your enclosure as a fill location or at the bottom as a drain.

      Features

    • G 1/4 thread.
    • Installs in minutes.
    • SpectraX powder coated colors available

    • Specifications

    • G 1/4 Inside Thread.
    • Nickel Plated

    • Included Parts

    • 1x PrimoChill Female to Female G 1/4 Drain Ball Valve

    • Warnings
       Over tightening can cause stripping of the threads.  
      PrimoChill is not responsible for any hardware damage. Use at your own risk.

      8. PRIMOCHILL Ice – Low-Conductive Coolant (32 oz.) – UV Blue

      PRIMOCHILL Ice - Low-Conductive Coolant (32 oz.) - UV Blue

      Feature

      Description

      PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
      WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

      USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

      **DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

      9. EKWB EK-CryoFuel Solid Premix Coolant, 1000mL, Azure Blue

      EKWB EK-CryoFuel Solid Premix Coolant, 1000mL, Azure Blue

      Feature

      Description

      Color:Azure Blue

      EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting color stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors – thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.

      With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and thermal efficiency with emphasis on color stability. The key feature of the new coolant formula is that it is not sedimenting after long hours of inactivity of the cooling loop. Designed specifically for computer liquid cooling systems, the EK-CryoFuel offers a 1-year shelf life from date of bottling.

      • contains corrosion and scale inhibitors
      • contains biological growth inhibitors
      • good heat transfer characteristics
      • color pigments don’t leave residue
      • high specific heat
      • chemically stable
      • low viscosity
      • non-toxic

      EK-CryoFuel contains synergistic corrosion inhibitors to protect metals commonly found in computer liquid cooling systems. It has been tested in accordance with BS5117 (ASTM D1384) and found to meet corrosion standards for copper, brass, aluminum and stainless steel. This coolant also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency, providing best value/performance ratio.

      Does not contain ethylene glycol or a bittering agent.

      Model: 3831109880357

      Conclusion

      By our suggestions above, we hope that you can found Primochill System Reboot Cooling Loop Treatment for you.Please don’t forget to share your experience by comment in this post. Thank you!

      Home Preview
      Logo
      Enable registration in settings - general