Top 10 Pipe Heating Mat

Feature:

GAOHOU 12V 12W Hive Electric Heater Plate Save Honey Beekeeper Bee keeping Equipment

Quantity: 1pcs

Max temperature: 60℃

Heater power: 12W

Voltage: 12V

Material: silicon rubber

Size: approx. 10.4*12.2cm

Cord length: approx. 24cm

Features:

Made from soft and supple silicon rubber.

Reduce energy costs for heating a Hive

Using the electric heating in the winter you can drastically reduces feed consumption

Rapid heating, uniform temperature, high thermal efficiency, good toughness

Easy to use, safe, waterproof, long life

For all kinds of automobile fuel tank, water tank, battery antifreeze heating insulation

Package included:

1 x 12V 12Watt Hive Electric Heater Plate Save Honey Beekeeper Bee keeping Equipment

Easy Heat, the leader in residential pipe freeze protection, presents the AHB Series pipe heating system. Preassembled and ready-to-install, the cable prevents pipes from freezing, keeping water flowing to -40 Degrees. Uses an energy saving thermostat.

Specifications
Model# GSHP-0313P
Pad size (Inch) 3″ x 13″
Foam Pad thickness 3.0MM
Volts 13.5 V DC
Power 7.5 W
Electric Current 0.55A
Lead Wire Lengh 18”

Package Include: 3 Packs 3” x 13” Heater pad

User’s Tips:
1.Do not Stretch the pad.
2.Apply pipe elbow heater pads to smooth and clean surfaces.
3.Clean the surface of the pipe with isopropyl alcohol and let dry.
4.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
5.This Heater pad requires 13.5V DC to operate at maximum efficiency.
6.Please ensure the connection to the proper voltage and the proper”on/off” switch is used.
7.The connection must be fused with the correct amperage.
8.If two or more tank heater pads are to be used they must be connected parallel.
9. Pipe elbow heater pads are not thermostatically controlled. Pipe insulation may be used with model#GSHP-0313P.
10.Packing include 1pc 3″x13″ Pipe Elbow heater pad.

Specifications:
Material: Carbon fiber
Color: Black
Max. Voltage: 5V
Connector: USB
Pad Size: 23×29cm / 9.05*11.41″
Cable Length: 1.5M / 59″
Temperature: 35℃-50℃

Package Includes:
1 × Heating Pad
1 × USB Cable

Note:

1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. If this heating pad is used in clothes, quilt or pillow, the temperature can be 40~45℃ after 20 minutes. If there is no covering, the temperature might be only 35℃ after 30 or 40 minutes(from room temperature >10℃ ).

The intex solar heater mat is designed to work with most intex filter pumps and uses natural sunlight to warm your pool’s water by 5 to 9 degrees Fahrenheit. Bypass valve included. Folds into a compact shape for space-saving storage in the off season. About robelle industries since 1973 robelle industries has been providing superior, dependable, and affordable swimming pool products. They have painstakingly built a line of quality swimming pool products that include pool chemicals, pool accessories, and everything in between. Robelle is dedicated to finding new product formulations that meet superior standards of pool chemical efficacy and product durability so your pool is safe, crystal clear, and healthy. Uses natural sunlight to warm pool. UV stabilized pvc construction. Designed to work with most intex filter pumps. Increases temperature 5 to 9 °f. Includes bypass valve and folds compact for storage.

THIS CABLE WILL NOT WORK unless it is in a cold environment. We’ve received a couple bad reviews because people ‘tested’ the cable in their warm living room. Eye roll. Please don’t be that guy. The built-in thermostat will NOT TURN THE CABLE ON unless it is in a cold environment. Now for the good news, this kit includes 16 feet of high temperature glass cloth tape for installing your cable. Pipe Freeze Pro is a commercial-grade, self-regulating heat cable which provides years of reliable freeze protection for pipes of all varieties, including copper, steel, PVC, ABS, PEX and more (pipe diameters up to 2”). It may also be used in drains and culverts through the winter months to promote drainage. Don’t buy from companies without a human available by phone. Heat cable is technical stuff and it’s great to have solid advice on how to install it. We are the only heat cable seller on Amazon who is a simple phone call away. Phone: 877-387-4218. Eat that off shore competitors! Pipe Freeze Pro is jacketed with a commercial-grade fluoropolymer and comes standard with a flame-retardant thermoplastic interior jacket. Our 16 gauge heating wires are 200% thicker than the conductors found in cheap, constant wattage cables like EasyHeat and Frost King. Thicker conductors mean greater heating efficiency, more melting power and long term cable integrity. Pipe Freeze Pro is self-regulating, meaning it ‘asks’ for more energy as it gets colder outside and less energy when it’s warmer. The entire length of our cable is temperature sensitive such that colder areas demand more power than warmer areas. Smart stuff. The stated cable length DOES NOT include an additional 24” unheated cold lead. For example, a 6 foot cable is 6 feet plus 2 feet of unheated cord. Installation is simple. Run Pipe Freeze Pro along the pipe, secure with fiberglass cloth tape (included) every 12 inches and wrap with standard pipe insulation. Read the manual for full instructions, of course.

What is the purpose of the heating cable?
The roof de-icing cable is designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. When properly installed and operated, this product creates a path for melted snow of ice (“melt water”) to drain from the roof to the ground.
Why you need to choose HIRD roof heating cable to protect your roof in the winter ?
HIRD roof heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble heating cable make installation easy for do-it-yourselfers with the included clips and spacers.
HIRD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HIRD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HIRD more reliable.
This kit is only designed for use on:
Metal or plastic gutters/downspouts
Inclined roofs
Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including: Roofs with wooden shingles, Rubber or rubber membrane roofs, Composite (tar and gravel) roofs, Wooden gutters or downspouts, Flat roofs
HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
These types of roofs require special installation or the use of a self-regulating cable.

Schluter-DITRA-HEAT is a modern, advanced under-tile floor heating system. A significant refinement on the underfloor heating systems from the last decade, it is thicker, easier to install, and is entirely waterproof. This is a roll of the heating wire used with the new DITRA-HEAT system. It is designed to be laid into the DITRA-HEAT underfloor tile membrane, and works with DITRA-HEAT thermostats to provide gentle, even heat to the tile it has been laid under. Product Features Strong and Robust Cable Schluter-DITRA-HEAT heating cables are very well manufactured, and have the durability they need to stand the test of time. Versatile Layout The cables can be laid in nearly any layout imaginable inside of the DITRA-HEAT membrane sheets, allowing you to fit your radiant floor perfectly to your tiled room’s layout. No Clips or Fasteners Needed The heating cables lock into the DITRA-HEAT membrane without any other accessories or tools, making clips, fasteners, and other wire stabilizers a thing of the past.