Top 10 Liquid Cooling Radiator For Computer

The Pacific C360 radiator is a high-performance 360mm copper radiator with high-density copper fin design and brass Tank. Built for 120mm high-static pressure fans with 27mm thickness for optimal heat dissipation, The radiator is manufactured from premium-quality materials that provide exceptional performance, unrivalled reliability. The unique stainless steel side panels guarantee the durability as well as reduce the weight of the radiator. Integrated G1/4″ Threads make it easy to install, while rigid connections Ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific C radiator series meets your cooling needs in every way.

The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

The CORSAIR iCUE H100i RGB PRO XT is an all-in-one liquid CPU cooler built for both low noise operation and extreme CPU cooling with a 240mm radiator and two CORSAIR ML120 PWM fans controllable between 400 RPM and 2 400 RPM Equipped with 16 individually addressable RGB LEDs on the pump head the H100i RGB PRO XT is customizable through CORSAIR iCUE software letting you create vivid lighting effects adjust fan speeds and enable Zero RPM mode to keep the noise down at low temperatures With a thermally optimized cold plate and low-noise pump design along with easy installation on most major CPU sockets the H100i RGB PRO XT pairs killer looks with chiller performance. Fan Airflow : 75 CFM

The Master liquid all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The Master Fan air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller or our exclusive cm Plus software. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a CORSAIR 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and CORSAIR engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet.

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Thermaltake Floe Dual Ring RGB 240 TT Premium Edition PWM TR4 LGA2066 Ready AIO Liquid Cooling System CPU Cooler CL-W157-PL12SW-A

The Floe Riing RGB 240 TT Premium Edition is the world’s first 16.8 million colors liquid CPU cooler with two 120mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by the patented TT RGB PLUS Software and AI interactive voice control. Functions within the software also allow users to monitor fan performance and track CPU temperature. Enjoy better cooling performance and greater CPU protection with one simple upgrade!

Radiator: Dimension:270 x 120 x 27 mm
Compatibility: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150, AMD
TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2, *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Water Block: Material:Copper

Pump
Rated Voltage:12 V/ 5V
Rated Current:325 mA / 0.4A
Motor Speed:3600 R.P.M

Fan
Dimension:120 x 120 x 25 mm
Speed:500~1400 RPM
Noise Level:19.8~24.7 dB-A
Rated Voltage:12 V
Max. Air Flow:14.2~42.34 CFM
Max. Pressure:0.17~1.54 mm-H2O
Connector:5 pin

Tube
Length: 326 mm
Material: Rubber
Weight: 1355g

ZOOMFLOW 240X SNOW

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.