Finding your suitable readers for laser range finder arduinop is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for laser range finder arduinop including detail information and customer reviews. Let’s find out which is your favorite one.
747 reviews analysed
1. HiLetgo VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder for Arduino
Description
VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout for Arduino
Descriptions:
Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings,
and the sensor provides two additional pins: a shutdown input and an interrupt output.
The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.
It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V.
Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
PIN Description
VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator,
you can instead use this pin as a 2.8 V input with VIN disconnected.)
VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.
GND The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.
SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V
SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V
XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low
puts the sensor into hardware standby. This input is not level-shifted.
Package included:
1* VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout for Arduino
2. Obstacle Avoidance Sensor, Lidar Range Finder Sensor Module TFmini-s, Lidar Tiny Module Single-Point Micro Ranging Module UART / I2C Compatible with Pixhawk, Arduino and Raspberry Pi
Feature
- ★ User Manual and Document: https://drive.google.com/open?id=1WhRAc1DTncZI5LNxJ2Zs_YsqsWrDiMuB. ★ ★ Note: TFmini-s version is UART by default. If you need I2C, please switch by yourself. It is compatible with Raspberry Pi and Arduino.
- Upgraded Lidar Module: TFmini-s is an upgraded single-point micro ranging module based on TFmini. The dead zone is shortened to 10 cm, and the outdoor performance and accuracy of different reflectances are improved.
- Tiny Body Yet Big Wisdom: low-cost, small-size and low power consumption. Distance Resolution is 1cm, frame rate is 100Hz, ambient light immunity is 70Klux and central wavelength is 850nm.
- Tiny Yet Powerful: It is based on ToF (Time of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection.
- Main Application Scenario: Pedestrian detection, vehicle detection, intelligent barrier gate and altimeter.
Description
Description:
TFmini-s is a upgraded single-point micro ranging module based on TFmini. The blind zone is shortened to 10cm, the outdoor performance and accuracy of different reflectivity are improved, it can achieve stable, accuracy, sensitive and high frequency range detection.
TFmini-s is compatible with both the UART and I2C interface. Different interfaces can be switched by commands.
Performance:
Operating Range : 0.1m~12m90%Reflectivity
Accuracy: ±6cm@(0.1-6m), ±1% @ (6m-12m)
Distance Resolution: 1cm
Frame Rate: 100Hz
Ambient Light Immunity: 70Klux
Operating Temperature: 0℃~60℃
Optical Parameters:
Light Source: VCSEL
Central Wavelength: 850nm
Photobiological Safety: Class1 (EN60825)
Electrical Parameters:
Supply Voltage: 5V±0.1V
Average Current: ≤140mA
Power Consumption: ≤0.7W
Peak Current: 200mA
Communication Level: LVTTL(3.3V)
Communication Interface: UART / I2C
Main application scenario:
Pedestrian detection
Vehicle detection
Intelligent barrier gate and altimeter
Package Including:
1 * TFmini-s UART / I2C Laser Range Finder Module
2 * Cable
3. TFmini Plus Waterproof Lidar Range Finder Sensor, UART I2C IIC I/O Anti-dust 1000Hz
Feature
- Document link http://en.benewake.com/download, Command list link https://github.com/TFmini
- Communication level: UART,I2C,I/O, Waterproof: IP65 waterproof, anti-dust
- Frequency: 1-1000Hz, standard is 100Hz. Operation temperature: -20℃~60℃
- Range: 0.1-12m, Certification: CE, ROHS, IEC, TFmini link https://www.amazon.com/dp/B07KDZ8SR8
- How to email us? Please click “Stemedu”(you can find “Sold by Stemedu” under Buy Now button), in the new page, click “Ask a question” to email us
Description
Description:
Range: 0.1-12m
Accuracy: ±5cm@(0.1-6m),±1%@(6m-12m)
Resolution: 5mm
Frequency: 1-1000Hz, standard is 100Hz
Light Sensitivity: 70klux
Operation temperature: -20℃~60℃
Waterproof: IP65
Light and Wave length: LED 850nm
Receiving Anger: 3.6 degree
Supply Voltage: 5V±0.5V
Average current: 110mA
Average Power: 550mW
Peak Current: 300mA
Communication level: UART,I2C,I/O
Cable length: 30cm
Package Includes:
1 X TFmini Plus
4. youyeetoo Slamtec RPLIDAR A1M8 360 Degree 2D Laser Range Lidar Sensor 12 Meters Scanning Radius for Obstacle Avoidance and Navigation of Robots
Feature
- HIGH ACCURACY – This laser scanner series has a sampling rate of 8000 times/s and 12 meters laser ranging distance ,configurable scan rate from 2~10Hz, Typical 5.5Hz. Perform a 360-degree omnidirectional laser ranging scan in the indoor surrounding environment and generate a contour map.
- PLUG AND PLAY – With the 3 feature: Build-in Serial Port and USB Interface, Open Source SDK and Tools and Integration with ROS, Just connecting the RPLIDAR and a computer via a micro USB cable, users can use the RPLIDAR without any coding job.
- OPTMAG ORIGINAL DESIGN – This laser scanner integrates wireless power and optical communication technology with OPTMAG technology, which repairs electrical connection errors due to physical wear and prolong the life-span.
- WIDELY APPLICATION – It can be used for home service/cleaning robot navigation and localization, general robot navigation and localization, smart toy’s localization and obstacle avoidance, environment scanning and 3D re-modeling, General simultaneous localization and mapping (SLAM), etc.
- GITHUB – https://youyeetoo.com/blog/slamtec-rplidar-a1-lidar-ld0005-b0016.html.We Have a Strong After-sales Service Team, Pls feel free to email us to get the Lidar sensor Datasheet or any questions of this lidar module after you purchased it. How to email us? Click “youyeetoo” and ask a question.
5. Laser Rangefinder Module V2 for Arduino Projects
Description
High-Performance & Low Cost Laser Rangefinder Module For Domestic & Industrial Applications
This is the most flexible Laser Rangefinder sensor that you can integrate easily in your projects that require some precise measurements & its also easy to handle handle easily even with an Arduino.
Technical Characteristics
- Power Supply Voltage & Current: DC3V ~ 3.3V / 100mA
- Measuring Range: 0.0001 ~ 80 m
- Resolution options: 0.1 mm / 1 mm
- Measurement Speed: 2Hz / 5Hz / 10Hz / 20Hz (0.05~1 seconds)
- Measurement modes: Single / Continuous Mode
- Distance Unit: m
- Laser Type: 620-690nm
- Laser Class: class ii, <1mW
- Spot Diameter at the distance m: 6mm@10m, 30mm@50m
- Protection Level: IP40
- Operating Temperature: -20°C ~ +50°C
- Storage Temperature: -20°C ~ +80°C
- Weight: 60g
- Dimensions: 48(L)42(W)18(H) mm
LRF module Features
- Single Measurement Mode that do a single measurement only
- Continious Measurement Mode that return a continiou results depending on the selected sampling frequency
- Programmable measurement Range up to 80M (5M, 10M, 30M, 50M, 80M options available)
- Programmable sampling frequency up to 20Hz (2Hz, 5Hz, 10Hz, 20Hz options available)
- Programmable Measurement Accuracy available (1.mm & 0.1mm)
- Serial Communication UART (BautRate=9600)
- All instructions are in Hex format
Remarks
Please note that this module can show some errors during measurement when it’s exposed to an environment where lighting intensity is too large, the ambient temperature is too high or too low, the reflector is too weak or too strong, or the target of a rough surface, different measurement objectives and measurement environment may cause some error of the measurement range or measurement results.
6. TFmini-S Lidar Range Finder Sensor Module Single-Point Micro Ranging Module for Arduino Raspberry Pi Pixhawk 4.5-6V UART I2C Interface
Feature
- △ User Document: How to work with pixhawk : https://discuss.ardupilot.org/t/avoidance-experiments-with-the-poc-and-benewake-tfmini/25277 △ How to use with raspberry pi: https://github.com/TFmini
- △ Note: TFmini-s version is UART by default. If you need I2C, please switch by yourself. It is compatible with Raspberry Pi and Arduino.
- △ TFmini-S is the improved version of TFmini, it is a single-point micro ranging module and could be widely used in the integrated application of various drones, UAVs, Robots and industrial equipments. It is based on ToF (Time of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection.
- △ Communication interface : UART/I2C, Operating Range : 0.1-12m, Frequency: 100Hz(1-1000Hz adjustable), Light source:VCSEL, Applicable voltage range: 4.5-6V
- △ What you will get: 1PCS TFmini-S and 2PCS Cables
Description
Description:
TFmini-S is the improved version of TFmini, it is a single-point micro ranging module and could be widely used in the integrated application of various drones, UAVs, Robots and industrial equipments. It is based on ToF (Time of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection.
Features:
Operating Range : 0.1-12m
Maximum operating range at 10% reflectivity : 5m
Applicable voltage range : 4.5-6V
Average power consumption : 0.12W
FOV : 2°
Communication interface : UART/I2C
Electromagnetic Compatibility(EMC):EN 55032 Class B
Baud rate:115200
Data bit:8
Stop bit:1
Parity bit:0
Minimum resolution ratio : 5mm
Frequency: 100Hz(1-1000Hz adjustable)
Light source:VCSEL
Wavelength:850nm
Operating temperature : 20-60C
Light sensitivity : 70,000lux
Accuracy : 1% (less than 6m), 2% (6m-12m)
Size : 42mm * 15mm * 16mm
Weight : 6.1g
Certification:CE,FCC,ROHS
Major Applications:
Traffic Monitoring
Obstacle detection
Level measurement
Smart device
Security and obstacle avoidance
Drone altitude holding and terrain following
Machine control and safety sensors
Distance measuring instrument
Package Includes:
1 X TFmini-S Lidar Range Finder Module
2 X CableS FAQ
Q1: Is TFmini-S available with 3.3V or other power supply voltage?
A1: Sorry, it is not available for the time being. The Standard power supply of TFmini-S is 5V±0.1V. If you have any further requirement, please contact our sales person to consult a customization design matter.
7. Gogogo Laser Rangefinder for Golf & Hunting Range Finder Gift Distance Measuring with High-Precision Flag Pole Locking Vibration Function︱Slope Mode Continuous Scan
Feature
- The most cost-effective rangefinder you can find on the market to provide you everything you need for golfing, hunting, bowhunting and other professional application with reliable product quality and after sales service
- Provide high-precision distance measurement. Integrates latest functions such as continuous range readings, ARC (angle range compensation), Pin-Seeking and Flagpole-Locking Vibration (Vibrate when the flagpole is locked) and Speed Measuring
- Measuring range from 5 to 650 yards, with +/- 1m high accuracy and 6x magnification. The flagpole locking function support a distance up to 150 yards (Flagpole only) and 250 yards (Aim the flag when it’s unfolded). Our rangfinder can meet most user’s needs
- Fully multicoated optic lens effectively reduces reflected light and increases the transmission of light giving you a brighter clear image. The diopter is adjustable for precise focus on display
- We Gogogo Sport are confident with our product and will provide a 1-year warranty. If you meet any quality issue with our product, we’ll directly send a new one or a full refund is optional.
Description
Specifications
Magnification: 6X
Field of view: 7°
Objective lens: 25mm
Eyepiece lens: 16mm
Exit pupil diameter: 3.9mm
Laser Type: 905nm
Lens Coatings: Fully Multi-Coated (FMC)
Battery: AAA Battery (Not Included)
Measuring Time: 0.5-1 sec
Distance Measuring Accuracy: ±1m
Angle Measure Range: ±45°
Slope Measure Range: ±20°
Pinseeker Range:5Y-150Y/5-170Y
Measurement Distance Range:5-650Y/5-900Y
Measurement Speed Range:0-300km/h
Dimensions:106*40*72mm
Net Weight: 184g
Low Battery Indicator: Yes
FlagPole-lock: Yes
Scan Mode: Yes
Water Resistant: Yes
8. Ximimark 1Pcs VL53L0X Time-of-Flight Distance Sensor Breakout GY-53 VL53L0XV2 Module ToF Laser Range Finder for Arduino
Feature
- The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.
- The VL53L0 uses ST’s FlightSense technology to accurately measure the time it takes for a transmitted infrared laser pulse to reach a small distance object and reflect back to the detector, so it can be considered a small, self-contained lidar system.
- The sensor can report distances up to 2 m (6.6 ft) with a resolution of 1 mm, but its effective range and accuracy (noise) are heavily dependent on environmental conditions and target characteristics (such as reflectivity and size) and sensor configuration. (The accuracy of the sensor is specified to be from ±3% to ±10% under extreme conditions).
- The measurement range is provided via the sensor’s I2C (TWI) interface, which is also used to configure the sensor settings. The sensor also provides two additional pins: the shutdown input and the interrupt output.
- The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for typical students or enthusiasts to use. It also operates at the recommended voltage of 2.8 V, which may make it difficult to interface with a 3.3 V or 5 V microcontroller. Our breakout board solves these problems, making it easier to get started with the sensor while keeping the overall size as small as possible.
Description
PIN description:
VDD: regulated 2.8 V output. Almost 150 mA can be used to power external components. (If you want to bypass the internal regulator, you can use this pin as a 2.8 V input and disconnect VIN).
VIN: This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I2C line high to this level.
GND: Ground (0 V) connection to the power supply. Your I2C control source must also share a common ground with the board.
SDA level shifting I2C data line: HIGH is VIN and LOW is 0 V.
SCL level shift I2C clock line: HIGH is VIN and LOW is 0 V.
NOTE:
XSHUT This pin is an active-low shutdown input; by default, the board pulls it up to VDD to enable the sensor. Driving this pin low causes the sensor to enter hardware standby. This input is not level shifted.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
Package Includes: 1Pcs
9. Slamtec RPLIDAR A1M8 2D 360 Degree 12 Meters Scanning Radius LIDAR Sensor Scanner for Obstacle Avoidance and Navigation of Robots
Feature
- Range Radius: 12 meters
- Power Supply: 5V
- 360 Degree Omnidirectional Laser Range Scanning
- Configurable Scan Rate from 2-10Hz
- Plug and Play
- 8000 Times Sample Rate, the Highest in the Current Economical LIDAR industry
- OPTMAG Original Design, prolong the life-span, Ideal for Robot Navigation and Localization
Description
RPLIDAR A1 is a low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC.
The system can perform 360degree scan within 6meter range. The produced 2D point cloud data can be used in mapping, localization and object/environment modeling.
RPLIDAR A1’s scanning frequency reached 5.5 hz when sampling 360 points each round. And it can be configured up to 10 hz maximum.
RPLIDAR A1 is basically a laser triangulation measurement system. It can work excellent in all kinds of indoor environment and outdoor environment without sunlight.
Features:
Measures distance data in more than 8000 times/s
360 Degree Omnidirectional Laser Range Scanning
8000 times sample rate, the highest in the current economical LIDAR industry
OPTMAG Original Design, prolong the life-span Configurable Scan Rate from 2-10Hz
Plug and Play
Application Scenarios:
Home service /cleaning robot navigation and localization
General robot navigation and localization
Smart toy’s localization and obstacle avoidance
Environment scanning and 3D re-modeling
General simultaneous localization and mapping (SLAM)
Technical Details:
Package Weight: 0.37kg (0.8lb.)
Package Size:13*10*8cm (5.1*3.9*3.1in)
Battery Exclude
Measurement Performance
Distance Range 0.15 – 6m,White objects
Angular Range 0-360 Degree
Distance Resolution<0.5mm
Angular Resolution≤1Degree
Package Includes:
1 X RPLIDAR A1(PWM motor driver embedded)
1 X USB Adapter
1 X RPLIDAR A1 communication cable
Technical Support:
Documents and download: http://www.slamtec.com/en/Support#rplidar-a1
Expert Support:
support@ smartfire.cn Skype: smartfire_cn
Product Customization: support@ smartfire.cn
Conclusion
By our suggestions above, we hope that you can found Laser Range Finder Arduinop for you.Please don’t forget to share your experience by comment in this post. Thank you!