579 reviews analysed
1. Cen-Tec Systems 94192 16 Ft. Hose for Home and Shop Vacuums with Universal Power Tool Adapter for Dust Collection, Silver
- 1. 25″ diameter X 16 foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with 1. 00″ and 1. 50″ internal and external connections for dust collection
- The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
- Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1″ soft TPE fitting, and a second bayonet with a soft 1. 50″ TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
- The soft molded TPE fitting measures 1. 00″ on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00″ soft TPE part measures 1. 40″ on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit
- Includes a second bayonet with a soft molded TPE fitting that measures 1. 50″ on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90″ on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool
- The inner collar and acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1. 75″ on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
- Designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric
- The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection
Cen-Tec Systems’ 94192 is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool, keeping you and your shop clean while protecting you from airborne particulate that can harm your health. The 94192 is designed to be versatile with three unique and tool industry typical connections. The inner collar with durable acetal clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles. A bayonet fitting with 1″ soft TPE molded fitting is perfect for small power tool connections. The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool. Changing from the 1″ fitting to a 1. 50 soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system. An air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface. The 94192 offers a 1. 25″ X 16 foot highly flexible commercial grade vacuum hose with smooth interior to prevent clogs and maximize air flow to the vacuum. The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum. Cen-Tec’s 94192 hose is designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric. The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection. Compares favorably with VAC005.
2. 2 Hoover Extension Wands WindTunnel Wand 38634078
2 Hoover Extension Wands WindTunnel Wand 38634078
3. Cen-Tec Systems 50 Foot Extension Hose for Shop and Garage Vacuums
- Features a 50′, flexible commercial-grade crush proof hose with 360 Degree swivel plastic curved handle and the necessary ends to permit you to customize the hose to work with a variety of models
- Can be used at the Full 50 feet or if preferred for your home shop or garage cut to a length that exactly fits your requirements using a common box Knife and re-threading the ends
- The curved end fits all tool Accessories sets designed 1.25Compatible. Using a tape measure or ruler confirm the opening of one of your Accessories to be 1.25, and this hose will be suitable
- Compatible with major garage utility vacuums including the Bissell Garage Pro, Hoover GUV Prograde L2310, Prolux Lite, Prolux Wet-Dry garage shop vacuum, Electrolux model 006218, Vacumaid Garage Vac
- Easily re-threading the different cuffs to fit your vacuum allows for compatibility among many different models and brands
4. Cen-Tec Systems 60110 Gray 50 Foot Vacuum Hose with 2 Inch Diameter
- 50 full feet of length
- This 2 inch diameter hose accepts threaded cuffs and bent Ends, allowing it work with a variety of vacuums
- Excellent as a general use vacuum hose where flexibility and a smooth interior is demanded
- Ideal for a Number of applications including dry and wet-dry commercial vacuums, extraction equipment, car wash vacuums, and central vacuums
- Can be cut to length as necessary
The 60110 crush proof commercial vacuum hose is ideal for a number of applications including dry and wet-dry commercial vacuums, extraction equipment, car wash vacuums, Central vacuums, and as a general use all vacuum hose where flexibility and a smooth interior is demanded. Sold standard in 50 feet (15.4M) lengths the 60110 commercial vacuum hose can be cut to length as necessary or provided in cut lengths direct from Cen-Tec Systems. The 60110 hose accepts standard 2 inch Threaded end cuffs and fittings making it immediately compatible with most major wet dry vacuums, Central vacuums and car wash applications.
5. Cen-Tec Systems 92014 Universal Extension Vacuum Hose, 20 feet
- The 92014 is designed to add 20 feet of highly flexible hose length to the hose on your canister or upright
- The hose has a 1 ¼” inner diameter and is 20 feet long. The hose will transfer the power of your vacuum without losing power due to its smooth inner diameter.
- The 92014 is equipped with a unique compression adaptor that will grab on to the curved end on your can¬ister or upright vacuum hose and add the necessary hose length to clean a complete flight of stairs with the vacuum resting safely on the ground. If you own a Hoover vacuum with the unique pin system simply take the compression fitting off and thread on the Hoover adaptor.
- The 92014 hose comes with two different hose ends to match with your accessories. Typically North Ameri¬can brands used 1.25” accessories while many European brands were designed for use with 1.375” accesso¬ries. The 92014 comes with alternative swivel wand fittings that allow you to match to either or both size of accessories.
- The flexibility to adaptor to your vacuum by simply adjusting the ends allows the extension hose to work with most popular brands of canisters and upright vacuums including Hoover, Eureka, Bissell, Miele, Royal, Oreck, Sharp, Riccar, Simplicity, Kirby, and Kenmore
The 92014 is designed to answer one of the principal issues with canister or upright vacuums – How do I vacuum difficult to reach spaces like stairs or elevated surfaces without having to lug the vacuum? Carrying a vacuum onto stairs and balancing it why you try to clean the risers isn’t safe. The 92014 allows you to leave the vacuum at the base of the stairs and clean a normal set of stairs without having to move the vacuum or risk it falling down the stairs. Unlike stretch hoses which extend a spring of wire in the hose that pulls back the more it is extended the 92014 is a traditional hose that won’t add resistance when fully extended. You also avoid the risk of a stretch hose slipping from your hand collapsing down the stairs damaging walls, floors, or worse. It is a simple, reliable solution to an everyday problem.
6. Think Crucial Replacement Vacuum Hose Compatible with Shop-Vac 20 Foot Hose (Stretches to), Fits Vacuum Models with 2-1/4 Inch Openings – Bulk (1 Pack)
- 1 PACK OF VACUUM HOSE REPLACEMENT COMPATIBLE WITH Shop-Vac 20 Foot Hose (Stretches to), Fits Shop-Vac Wet/Dry Vacuums with 2-1/4 Inch opening. Flex that hose like it was meant to be used. Reach over, under and around things with impunity!
- CLEAN AND HEALTHY LIFESTYLE: Now you can clean the places you feared to reach. No more worrying about if your vacuum’s hose will make it. Clean EVERYWHERE.
- SIMPLE AND EASY TO INSTALL: You can get back to cleaning as soon as possible! A one-touch hose removal and installation system make it quick and convenient! Hose is 20-Ft long.
- SAVE YOUR SANITY with a new hose. No more worrying about if the knick-knack shelf is clean or if it’s dusty. You can reach it now. Stretch your vacuum to the limits and get the peace of mind that comes with cleaning everything.
- CRUCIAL VACUUM manufactures premium quality vacuum replacement parts and stands behind the quality and workmanship of all our products. We maintain a thorough quality control process to ensure compatibility with Shop-Vac vacuum hose parts and models listed above.
7. Hoover Type K Spirit Vacuum Cleaner Replacement Bags, Package of 10
Hoover non-reusable throw-away filter bag, Type K Fits canister type (Spirit, etc.)
8. 2-1/2" x 10′ Ultra-Flex Clear Vue PVC Hose – MADE IN USA!
9. Poolmaster 33430 Heavy Duty In-Ground Pool Vacuum Hose With Swivel Cuff, 1-1/2-Inch by 30-Feet
- For use with standard swimming pool vacuum head and telescopic pole for manual vacuuming
- not made for automatic vacuums
- Swivel cuff for kink-free maneuverability
- UV and chemical resistant
- extruded flexible EVA and poly-welded EVA cuffs
- Spiral wound construction for strength, flexibility, and maximum flow rate
- superior tensile strength for crush-resistant operation
- Swivel cuff end connects directly onto the vacuum head and the non-swivel end connects to the skimmer
- High quality and made to last in the USA
- measures 1-1/2-inch diameter by 30-feet
Poolmaster’s Swimming Pool Maintenance Collection offers a generous selection of performance and built-to-last products made from resilient components designed to keep your pool sparkling. The Heavy Duty In-Ground Vacuum Hose features flexible, yet durable EVA and non-corrosive material. Swivel cuff is built in for kink-free maneuverability during the cleaning process while the spiral-wound construction adds strength, aids in flexibility and provides maximum water flow. Superior tensile strength provides crush-resistant operation. Hose should be used with a standard swimming pool vacuum head and a telescopic pole for manual pool vacuuming only and should not be used with automatic pool cleaners. Hose works best when warm to maximize flexibility. Measures 1-1/2-inch in diameter x 30-feet and is made in the USA. Note: the opening size inside pool skimmers may vary, so a fitting or vacuum plate may be needed inside the skimmer for the most secure fit and airtight seal of the vacuum hose.
From the Manufacturer
Since 1958, Poolmaster has been a leading manufacturer of aftermarket pool and spa products with an unwavering commitment to quality, service and reliability. Poolmaster offers products across six different product lines- Backyard and Decor, Inflatables, Floats, Maintenance, Swim and Dive, and Toys and Games. Poolmaster – We Make Water Fun!
10. High Performance Silicone Vacuum Tubing Hose, ID 0.12" (3mm), OD 0.27" (7mm), 5 Feet per roll (1.5 Meter), Black 60 psi Maxium Pressure
- No logo, hose Inside Diameter: 0.12″ (3mm), OD 0.27″ (7mm), Length: 5 Feet(1.5 Meter ) Per Roll
- Made of premium silicone material to ensure strength and durability
- It applies to general purpose air or water transportation in the engine bay
- Broad operation temperature : -76F to 374F (-60C to 190C). 60 PSI Maximum pressure rating
- Heavy wall design gives it the ability to handle extreme pressure
Made of High Temp Premium Grade Silicone. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
By our suggestions above, we hope that you can found Hoover Elite Soft And Light Vacuum Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!