998 reviews analysed
1. Honeywell FC40R1037 Return Grill Media Air Filter, 12" x 24" (Pack of 5)
2. Honeywell Dpfg12x24x5am8 Grille Filter 12″ X 24″ X 5″, 2 Pack, Merv 8
3. Honeywell Dpfg12x24x5am13 Grille Filter 12″ X 24″ X 5″, 2 Pack, Merv 13
Feature
- Replaces Expandapac filter # FC35A1076 that was used in model F35R1036.
- Accumulair grille filter.
- Nominal size 12 x 24 x 5 (Actual size 11 3/4 x 23 3/4 x 4 3/8)
- High-efficiency alternative to one-inch filters. Larger media capacity allows for greater dust-holding
- No assembly required. Easily inserts into and out of existing return grille.
4. 20" X 30 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 22.5 X 31.75]
Feature
- 20″w X 30″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5″ Width X 32.5″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel and No Sharp Edges
- Our Filter Grille Latch is Easy To Use On Your Fungers And Requires No Screwdriver To Open.
- Removable Door/Face For Easy Filter Change & Cleaning – Uses a 1″ Thick Filter
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
10″ x 8″ Steel Return Air Filter Grill for 1″ Filter – Removable Face/Door – HVAC VENT DUCT COVER – Flat Stamped Face [Outer Dimensions: 12.5 X 9.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
5. 20" X 20" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
Feature
- 20″ X 20″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
- High Quality Solid Stamped Steel – No Sharp Edges
- EASY TO USE – Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation – And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
Description
20″ X 20″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 22.5 X 21.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
6. 14" X 24 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
Description
14″ X 24 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
7. 12" X 12" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC DUCT COVER – Flat" Stamped Face – White [Outer Dimensions: 14.5 X 13.75]
Feature
- 12″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 14.5″ Width X 14.5″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel and No Sharp Edges
- Our Filter Grille Latch is Easy To Use On Your Fungers And Requires No Screwdriver To Open.
- Removable Door/Face For Easy Filter Change & Cleaning – Uses a 1″ Thick Filter
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
8. 14" X 14" Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face -White [Outer Dimensions: 15.75w X 15.75h]
Feature
- Beautiful and Sturdy
- High Quality Solid Stamped steel and No Sharp Edges
- Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open.
- Removable Door/Face For Easy Filter Change & Cleaning – Uses a 1″ Thick Filter
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
14″ X 14″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face -White [Outer Dimensions: 15.75w X 15.75h]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″ thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 1.75, listed height + 1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.”
9. 12" X 24 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 14.5 X 25.75]
Feature
- Beautiful and Sturdy
- High Quality Solid Stamped steel and No Sharp Edges
- Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open.
- Removable Door/Face For Easy Filter Change & Cleaning – Uses a 1″ Thick Filter
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
12″ X 24″ Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face -White [Outer Dimensions: 13.75w X 25.75h]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″ thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 1.75, listed height + 1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.”
10. 24"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 25.75"w X 13.75"h]
Feature
- 24″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
Description
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
24″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Conclusion
By our suggestions above, we hope that you can found Honeywell 12X24 Return Air Filter Grille for you.Please don’t forget to share your experience by comment in this post. Thank you!