778 reviews analysed
1. uxcell Heating Element Coil Wire AC220V 1500W / AC110V 375W Kiln Furnace Heater Wire 5.8mm 560mm 5PCS
Feature
- Wire Diameter: 0.8mm/0.031″
- Coil Diameter: 5.8mm/0.23″
- Length: 560mm/22.05″.
- Rated Voltage/Power: AC220V 1500W / AC110V 375W
- Resistance: 29-30ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
Description
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
2. DIY Heating Coil Wire Kanthal A1 Resistance Wire 15 Feet (Alien 0.3×0.8+32GA)
Feature
- Kanthal A1 Heat Resistant Wire:0.3*0.8+32GA.
- The product shall be used by advanced users ONLY
- This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
- Package including the organic cotton as a gift.
- We provide warranty time, please don’t hesitate to buy, if you have any problem, we will give the satisfy solution.
Description
Kanthal A1 is a ferritic alloy rated for use at temperatures up to 1400°C (2550°F). The alloy has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries.
3. Kanthal A1 – 100′ – 24 Gauge Resistance Wire
Description
Wire Specifications:
– Diameter: 24 Gauge / 0.51mm
– Shape: Round
– Alloy Kanthal A-1
– Length 100 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 2.04 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
4. Aodesy Heating Element Coils Wire Long 710mm/28inch Kilns Furnaces Heater Coil Wire AC 220 2000W
Feature
- 1Pcs Heating Element Coil in a Pack
- Voltage: AC 220V
- Power: 2000W
- Outer Diameter: 6mm / 0.24inch
- Length: 710mm / 28inch
- Heating alloy, high temperature resistant, corrosion resistant, good thermal efficiency, even heating, safe use and long service life
- This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
- Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
- Widely used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances
Description
1 Pcs Heating Element Coil in a Pack
Voltage: AC 220V
Power: 2000W
Temperature: 500°C~600°C
Outer Diameter: 6mm / 0.24inch
Length: 710mm / 28inch
Packing Weight: 47g
Packing Size: 18x12x1.5cm
This is not an original product, but it is only a replacement part. This item replaces the inner coils of your dryer’s heating element assembly.
They are heating element wire coils for use in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances.
Note
Please stretch these heating element coils before connecting to power, or they would burn and cause damage.
They can not be cut into parts to use, or the power will increase, which is dangerous.
5. Prime Wire & Cable RHC1200W240 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
Description
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
6. 6 ft – AWG 26GAx3+32GA Alien Resistance Wire Kanthal A1+ SS316L Prebuilt Wire Coils for Household Wiring Use
Feature
- Kanthal A1 + Stainless Steel 316L Heat Resistant Wire
- 26GAx3+32GA x 2m/roll
- This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses
- This product is not intended to be used with prohibited or illegal products
- Spools of pre-twisted wire makes this a super easy to work with product
- The product shall be used by advanced users ONLY
Description
Don’t toss that old appliance with a heating element of yours, repair it instead! Fix that old heating element in your toaster, space heater, or whatever your electrical need may be that requires this specification of wire!
Wire Specifications:
Diameter: Line up 3×26 Gauge (0.405mm) wire, wrapped with a 32 Gauge (0.202mm) Wire with ‘S’
Length: 2 meters | 6′ Feet
Shape: Flat
7. Pre made Resistance Heating Wire 9 Different Coils 82pcs for DIY project Alien Kanthal A1 Kit
Feature
- High Quality: Made by aluminum alloy, stable, high quality and healthy prebuilt wires
- Durable & Easy to Use:1400℃/ 2550°F high melting temperature, 3mm resistance wire kit, easy install and durable
- Well Organized: Coming with 9 metal cases, portable for travel and reusable
- Easy Use:Push down on the label to open
- Squeeze the sides of cover to pop back
- Get the 9in1 Kit now!
Description
Specification:
- Material: aluminum alloy A1
- Internal Diameter: 3mm
- Quantity in package: 9 types 82Pieces totally.
Including:
- 10 x Alien wire 0.45ohm
- 10 x Super Flat wire 0.3ohm
- 10 x Clapton 0.8 wire 0.8ohm
- 10 x Fused wire 0.4ohm
- 10 x Clapton 0.4 wire 0.4ohm
- 8 x Staggered wire 0.3ohm
- 8 x Juggernaut wire 0.45ohm
- 8 x Staggered Fused wire 0.27ohm
- 8 x Staircase wire 0.25ohm
Above OHMs are for single one.
Note:
- Keep out of reach of children and pregnant women.
- Keep away from high temperatures.
- Do not use the wires if you are under the age of 18.
8. Prime Wire & Cable RHC500W100 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
Description
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
9. 2 Packs Staggered Fused Clapton wire 10ft – (26GA+32GA) x2+32GA Resistance Wire NI80 SS316 Wires (ss316L+ss316L)
Description
This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses Length: 10 Feet Shape:Flat
Conclusion
By our suggestions above, we hope that you can found Heating Coil Wire for you.Please don’t forget to share your experience by comment in this post. Thank you!