The Best Enclosure Cooling

The Altelix NF141208VFHA1 Heated and Vented Fan Cooled Weatherproof NEMA Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This rugged NEMA box is molded from durable and UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. It features a stainless steel continuous door hinge and stainless steel latches with provision for padlocks. The door is fully gasketed making this enclosure suitable for use indoors or outdoors.

Power
This model features a 2.5mm thick finished aluminum plate with two pre-wired 120VAC surge-protected power outlets. A terminal strip and ground lug are provided for simplified wiring on-site. In addition the mounting plate features a number of pre-drilled hole patterns for mounting popular wireless access points without any modifications.

Heater
This model also features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is situated below the mounting plate and wired internally so it does not interfere with user installed equipment or require the use of the AC outlets.

Cooling Fan Ventillation
This model also features dual 4″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure and the internal aluminum mesh filters are removable for cleaning.

Mounting
Four removable stainless steel mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. An optional pole mounting kit (model NMKS-300-08) is also available.

When connecting TDBT SuperC to a USB 3.1 or Thunderbolt 3 computer, you can get a read/write speed around 1000 MB/s. As a comparison, even for high-end SATA SSD, the Max. Rate is 550MB/s for reading and 450MB/s for writing.

NVMe SSD generates massive heat when working, so we enhanced the cooling system:

1. Double side Copper strip on PCB to conduct heat effectively
2. Specially designed SSD heat sink rapidly radiating heat from internal SSD to external Aluminum case
3. Sturdy Aluminum case with heat exchange fins, practically enlarge the heat dissipation area

TDBT SuperC works with almost all brands M-Key/B&M-Key NVMe M.2 SSD. For Samsung 970 EVO plus SSD, if you want to use with Mac, update the SSD firmware is required. If you need technical support, please contact us.

To get the best performance:

• Your M.2 NVMe SSD read/write speed is faster than 1000MB/s
• Your computer has a USB 3.1 Gen2(Max. Speed 10Gbps) or Thunderbolt 3 port. For USB 3.1 Gen1 port, the max speed you get is 5Gbps only
• If you have a powerful computer, as better

Tech Specs

• Controller chip: JMicron JMS583(PCIe 3.0×2)
• USB 3.1 Gen2 type C interface, Max. 10Gbps for M.2 NVMe SSD
• Support M-Key and B&M-Key NVMe M.2 SSD only, NOT work with M.2 SATA AHCI SSD
• Supports SSD size(mm): 22×30, 22×42, 22×60, 22×80
• Supports Max. 2TB SSD
• Compatible with USB 2.0/3.0/3.1 Gen1/3.1 Gen2/Thunderbolt 3 standard
• Work with Sony PS4/PS4 Slim/PS4 Pro, Microsoft Xbox One/One X as USB external storage. SSD formatting required, back up files before connecting
• Including 0.3M/1FT USB-C to USB-C and USB-C to USB-A data cable, compatible with USB-A/USB-C/Thunderbolt 3 ports
• System requirements: Windows 8.1/10 or later, macOS 10.10.2 or later, Android device should have USB-C port and supports OTG

LIGHTNING SPEED: Fledging Shell Thunder 2 is the next generation of Thunder! It’s our fastest, most elegantly designed external SSD Thunderbolt 3 enclosure. With up to 2TB of data storage and 2,300 MB/s read and 1,700 MB/s write speeds, Shell Thunder 2 is ideal for gaming, video editing, research, design, content creation, and much more.

ACTIVE COOLING: Thunder 2 is re-engineered for active cooling. We stress-tested this design with an Intel SSD by writing 3TB in 60 minutes. The whisper-quiet 4000 RPM fan makes Thunder 2 a bit wider than Thunder.

M.2 NVMe ENCLOSURE: Designed for 2280 and 2260 M.2 NVMe and AHCI SSD. Not compatible with M.2 SATA SSD.

ANODIZED ALUMINUM CASING: We believe products should look and feel good. Thunder 2 is built with a rugged anodized aluminum casing, built to look good while protecting your data.

UNMATCHED CUSTOMER SERVICE: We are here to delight you. Ask us any questions or for support at any time.

FLEDGING’S MISSION: Fledging is on a mission to create accessible, affordable premium consumer electronics. The market offers two bad choices: skip your next month’s rent for new tech or choose an off-brand gadget doomed to break the day after the return policy expires. Fledging offers a third choice by creating premium tech at a non-premium price.

COMPATIBILITY NOTE: Shell Thunder 2 is not compatible with Apple SSDs, including our Fledging Feather SSD.

The Sabrent ec-dffn SATA lay-flat docking station supports the direct insertion of desktop 2.5″/3.5″ Sata hard drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the Lightning speed of USB 3.0 To quickly transfer files up to 5 Gbps!

keep your drives running cool, with built-in cooling fan
The docking station features a built-in cooling fan that provides increased reliability and lifespan to HDD by keeping the drives cooler.
* supports standard desktop 2.5″”/3.5″” Sata hard drives.
* supports hard drives up to 6TB.
* on/off power switch.
* LED light indicates power and activity status.
* hot-swappable, plug and play, no drivers needed.
* reverse compatible with USB 1.1 & USB 2.0.
* transfer rates up to 5 Gbps w/USB 3.0
* transfer rates up to 480 Mbps w/USB 2.0

system requirements:
* available USB 3.0 for high speed data transfer
* Windows: 2000/XP/Vista/7/8 (both 32-bit & 64-bit versions)
* Mac: OS X

package contents:
* Sabrent ec-dffn lay-flat docking
* power supply
* USB 3.0 cable
* user manual

Compatibility Note on NV-C01:
● The adapter fits NVMe PCIe M.2 ONLY!
● NVMe come in ‘M’ or ‘B+M’ key, however, many SATA NGFF also come in ‘B+M’ which is NOT supported. You can NOT classify a ‘B+M’ disk by ‘KEY’ form. Do a research and make sure it is ‘NVMe’
● The card reader does NOT fit SATA NGFF, PCIe AHCI, mSATA or SSDs pulled from Apple Mac
● Some rare disks come in multiple editions with different interface, for example Samsung SM951 (NVMe and AHCI are available)
● Not fit AHCI disks like Samsung XP941, SM951 MZ-HPV256/512. (*SM951 MZ-VPV5120/2560 are supported for they’re NVMe)
● The caddy will heat up since NVMe produce a lot of heat

– Newest NVMe PCIe to 10Gbps USB3.1 Gen2 Adaptor
– Two 10Gbps USB Type-A and Type-C Cables included
– Premium Aluminum Case with Excellent Cooling Effort
– 2280, 2260, 2242, 2230 form factor; ‘M’ and ‘B+M’ Key
– Thermal Silicon Pad Design – Excellent Heat Dissipation
– Compatible with multi-OS: Windows 7, 8, 10 & Mac OS
– Comply with Trim, UASP, Power Saving and Plug & Play

Tested NVMe:
‘M’ Key:
Samsung 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO Plus Pro, WD Black SN750, ADATA XPG SX8200 and SX6000 Pro, Corsair Force MP510, Crucial P1, Sabrent Rocket, Silicon Power P34A80, Intel 600P, 660P, 760P, 900P, Patriot, SK Hynix, Kingston KC1000, Mushkin Pilot, HP EX900, EX950, Pioneer APS-SE20G, addlink S70
‘B+M’ Key:
Kingston A1000, Corsair MP300, WD Blue SN500, Lexar NM520, Toshiba OCZ RC100, Intel Optane 800P, LITEON T11 Plus and NVMe pulled from notebook like Lenovo SL700, ST8000

Packaging:
1* ElecGear NV-C01 (105*45*14mm, 135gram)
1* USB A2C Cable
1* USB C2C Cable
1* PH0 Screwdriver
(Internal Memory is NOT included!)

Specifications:

Material: Aluminum alloy

Color: Black

Compatible with: Raspberry Pi 4

This armor aluminum case open design in the surface, perfectly supplying efficient cooling for the Raspberry Pi 4.

Packing List:

Aluminum Armor Case with Dual Fan x 1pcs

Assembly screw x 1 set

Cooling fan x 2

Note: Raspberry Pi is not included.

ineo believes protection is never enough for your precious data in your M.2 NVMe SSD, so we introduce a best cooling enclosure 2598NVMe with transfer in USB 3.2 Gen 2 10Gbps ultra fast speed.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 3.3V 6000 RPM, smart active when temperature is over 45 degree centigrade

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X

Package Contents:
1 x ineo C2598 Rugged Aluminum M.2 NVMe SSD Enclosure
1 x Screws Kit
1 x Silicone Thermal Pad
1 x User Manual
1 x Guarantee Card

Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Control chip：ASM2362(10Gbps)
Support SSD：M.2 NVMe SSD
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS：Windows/Linux/Mac
Product material：Aluminum alloy + stainless steel
Cable length：24cm/9.44 inches
Adapter：USB Type-A to C adapter

The Gen 3 Speedbyte Nvme Enclosure Have Combinated Tool-Free And Bulit-In Slient Fan Function In One Device. No More Screws And 100% Tool-Free. Aluminum Alloy Shell And Bulit-In Fan Can Achieve 3X Heat Dissipation Effect Of Other Ordinary Ssd Enclosures.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer.
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 5V 6000 RPM, smart active when connecting to PC or mobile phone.
5. 1-2 minutes of intelligent sleep.

Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Control chip：JMS583(10Gbps)
Support SSD：M.2 NVMe SSD 2280, 2260, 2242
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS：Windows/Linux/Mac
Product material：Aluminum alloy shell+ stainless steel + Built-in silent fan PCB
Cable length：22.5cm/9.44 inches
Adapter：USB Type-A to C adapter

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X
Linux

Package Contents:
1 x Speedbyte Gen 3 NVMe enclosure(TOOL-FREE & Bulit-in slient Fan)
1 x USB 3.0 (Type-A) cable
1 x USB Type-C cable
1 x Portable rope

Specification:
Condition: 100% Brand New
Item Type: Aluminum Alloy Box (with flat plate)
Color : Brushed Black Oxide
Material: 6063-T5 Industrial Extruded Aluminum Alloy Profiles
Height: Approx. 68mm / 2.7in
Width: Approx. 145mm / 5.7in
Length: 150/200/250/300mm (optional)
Optional Dimensions:
Approx. 68 x 145 x 150mm / 2.7 x 5.7 x 5.9in
Approx. 68 x 145 x 200mm / 2.7 x 5.7 x 7.9in
Approx. 68 x 145 x 250mm / 2.7 x 5.7 x 9.8in
Approx. 68 x 145 x 300mm / 2.7 x 5.7 x 11.8in
Shell / Baffle Thickness: 1.25-1.5mm
Product Structure: Split Type

Package List:
2 x Aluminum Cooling Box
2 x Baffle
1 Set of Screw

Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.