
Nowadays, there are so many products of computer water cooling system coolant in the market and you are wondering to choose a best one.You have searched for computer water cooling system coolant in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings computer water cooling system coolant which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
688 reviews analysed
1. PrimoChill System Reboot – Cooling Loop Treatment
Description
Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.
Specifications
Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics
Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)
Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear
Warnings
2. fosa G1/4 Inner Thread Water Cooling System Filter Fine Screen Funnel Shaped Filter for PC Water Cooling, Compatibility Water Cooling Reservoir, Computer Water Cooler Accessories(Black)
Feature
- G1/4” microwire filters can be easily installed into almost any liquid cooling system, which can be removed and quickly installed
- Filter the impurities produced by the computer water cooling system to ensure the safety of the pump
- Funnel Shape & Fine Filter Screen: It adopts very fine filter screen to give you more complete and more precision filtering effect
- Fast & Stable Filtering: The long tube is able to filter as many impurities as possible in a short time stably
- Suitable for Computer Cooling System: This G1/4 inner thread water cooling filter with stable and reliable performance is applicable to computer cooling system
Description
Description:
This G1/4” inner thread water cooling filter helps reduce the impurities produced by the computer water cooling system to ensure the safety of the pump. The funnel shape gives you a great filtering effect, and very fine filter screen makes filter more complete and more precision. And the long tube that made of copper, aluminium and PMMA can make the filtering faster while removing impurities as many as possible.
Specifications:
Product Type: Water Cooling Filter
Model: GLQ-JX1
Type: Funnel shaped
Material: Copper + PMMA
Color: Black, Blue, Green, White, Red (Optional)
Length: Approx. 5cm / 2.0in
Max Diameter: 29mm / 1.14in
Min Diameter: 27mm / 1.06in
Size: Approx. 5.4 * 3.5cm / 2.1 * 1.4in
Weight: Approx. 48g
Package List:
1 * Water Cooling Filter
3. Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
Feature
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
Description
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
4. PrimoChill Rad Clean – Radiator Cleaning Treatment KIT
Description
The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications
Compatibility Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions For this pre-treatment to work correctly follow the instructions below.
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di waterStep 6:Drain radiator and let dry completely.
Warnings Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.
5. Zopsc DIY Compputer Water Cooling Kit with 240mm Heat Sink, LED Fan, CPU/GPU Block, Water Pump Reservoir,Transparent Hose, etc
Feature
- CPU / GPU Block: The CPU/GPU block is constructed with a copper base to provide exceptional heat transfer and cooling performance.
- Cylindrical Water Reservoir: The cylindrical water reservoir is manufactured from high quality transparent acrylic so that the circulation system is visible.
- Water Pump: Waterproof, stable, high quiet, long life. 240mm Heat Sink: Provide the excellent heat dissipation, as you need for highly overclocked desktop processors.
- Transparent Hose: Upgraded flexible anti-explosion, hoses enable a space-saving installation and exceptional durability.
- LED Fan: The extreme performance dual fans offer a high air static pressure with lower noise.
Description
Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
3. Universal GPU block
Interface: G1 / 4 universal thread, diameter of 12.9mm
Material: Bottom: copper; Cover: POM high temperature materials
Waterway: 0.8MM parallel waterway
Compatibility: Matches a fan with a distance of 53 mm to 61 mm
Supported tube: 9.5mm ID / 12.7mm OD PU tube, or 10mmID / 16mmOD solid tube, or 8mmID / 12mmOD silicon tube (ID is the inner diameter, OD is the outer diameter)
4. Cylindrical Water Reservoir (including plastic bracket * 2, metal bracket * 2, screw pack * 1):
Water reservoir height: about 160mm
Water reservoir diameter: 5cm
Water reservoir interface: G1 / 4 universal thread
Interface diameter: 12.9mm
Package List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
6. EKWB EK-CryoFuel Premix Coolant, 1000mL, Blood Red
Description
The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.
7. IronBuddy Water Cooling Tank Reservoir G1/4 Threaded T Virus Cylindrical Cooler Tank for Computer Water Cooling System, 260mm (Grey)
Feature
- ✬Water cooling tank is made of aluminum cover and PMMA cylinder body, high quality, durable to use.
- ✬Connecting Thread: G1/4 thread (International standard), compatible with almost all G1/4 water cooling fittings.
- ✬6x G1/4 thread holes, easy to DIY your waterway and unique water cooling system.
- ✬Size: 255*55mm / 10.04*2.17inch.(Height / Aluminum Cover Diameter). Cylinder Diameter: 50mm / 1.97inch.
- ✬The cylindrical reservoir tank perfect for PC water cooling system.
Description
IronBuddy G1/4 Threaded T VirusCylindrical Tank Perfect for PC Water Cooling System.
Materials: Aluminum + PMMA.
Color: Grey.
Size: 255*55mm / 10.04*2.17inch.(Height /Aluminum Cover Diameter). Cylinder Diameter: 50mm / 1.97inch.
Package included: 1Pcs Water CoolingTank, 2Pcs Hoop, 4Pcs Screw and Nuts.
8. Kyerivs G1/4" Male to Female Extender Fitting, 90° Rotary Enhance Multi-Link Adapter Fitting for Computer Water Cooling System, Black, 4-Pack
Feature
- Fitting for PC water cooling application
- G 1/4″ Male to Female 90° Rotary Fitting with black o-ring for leak-proof seal
- Top of fitting can turn 360 degrees full circle, the adapter is angled at 90 degrees
- High Quality Nickel-plated Brass
- Warranty:1 Year Warranty and 30-Day Return Guarantee – Kyerivs Value Your Satisfaction.、
Description
Features:
100% brand new and high quality.
Fitting for PC water cooling application.
Extender fitting.
Can rotate 360 degrees / maximum channel design.
Exterior design for water cooling system.
Embedded O ring design.
The adapter can rotate its spout full around (360˚) .
So the 90˚ angle can be in precisely the direction needed.
The advanced design reduces coolant flow restriction.
The nickel plated brass construction provides durability, ensuring a long lifespan for the part.
Specifications:
Type Name: 90 Degree Rotary Fitting Adapter
Material: Nickel-Plated Brass
Color: Black (Optional)
Size: 2.9cm/1.14in (Approx.) (without screw length)
External tooth gauge: G1/4 “(international general tooth gauge)
Internal tooth gauge: G1/4 “(international general tooth gauge)
Connector: 10mm / G1/4″ diameter
Type: Water Cooling
Package Included:
4 x G1/4″ 90° Rotary Fitting
Warranty:
1 Year Warranty and 30-Day Return Guarantee – Kyerivs Value Your Satisfaction.
9. EKWB EK-CryoFuel Solid Premix Coolant, 1000mL, Azure Blue
Description
EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting color stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors – thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.
With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and thermal efficiency with emphasis on color stability. The key feature of the new coolant formula is that it is not sedimenting after long hours of inactivity of the cooling loop. Designed specifically for computer liquid cooling systems, the EK-CryoFuel offers a 1-year shelf life from date of bottling.
- contains corrosion and scale inhibitors
- contains biological growth inhibitors
- good heat transfer characteristics
- color pigments don’t leave residue
- high specific heat
- chemically stable
- low viscosity
- non-toxic
EK-CryoFuel contains synergistic corrosion inhibitors to protect metals commonly found in computer liquid cooling systems. It has been tested in accordance with BS5117 (ASTM D1384) and found to meet corrosion standards for copper, brass, aluminum and stainless steel. This coolant also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency, providing best value/performance ratio.
Does not contain ethylene glycol or a bittering agent.
Model: 3831109880357
10. Thermaltake Pacific M240 D5 Res/Pump PETG Hard Tube Water Cooling Kit CL-W216-CU00SW-A
Feature
- W3 Water Block: 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism
- PR15-D5 Res/Pump Combo: Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a high performance solution
- R240 Radiator: Manufactured from high-quality German aluminum alloy and aerospace-grade materials, this radiator provides exceptional performance
- Ring 12 RGB Radiator Fan: 3 patented circular 256 multicolored 120mm RGB radiator fans with high-static pressure design, one smart fan controller included
- C-Pro Compression Fitting: With special four rubber O-rings leak-free design and patented structure for ultimate loop management. 8 compression fittings are included in the kit
Description
The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.
P/N: CL-W216-CU00SW-A
Dimension: 518(L) x 198 (W) x 223 (H)
Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)
Components Dimension
Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm
Fan Spec: 1500 RPM (1000RPM with LNC)
Coolant: Pure Clear Coolant
Kit Contents
CPU Water Block
– Pacific W3 CPU Water Block x1
Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1
Radiator
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1
Fittings
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2
Fan
– Riing 12 LED RGB 3 Pack x1
Coolant
– Thermaltake C1000 Pure Clear Coolant x1
Tube
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1
Accessory
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
Conclusion
By our suggestions above, we hope that you can found Computer Water Cooling System Coolant for you.Please don’t forget to share your experience by comment in this post. Thank you!