755 reviews analysed
1. HBN Outdoor Indoor Wireless Remote Control 3-Prong Outlet Weatherproof Heavy Duty 15 A Compact 1 Remote 1 Outlet with Remote 6-inch Cord 100ft Range ETL Listed (Battery Included)
- READY-TO-GO: Each HBN Wireless Remote Control Outlet kit contains everything you need to start (even the remote batteries!). Simply plug and play, or sync up the outlets to suit your needs.
- WEATHERPROOF: Our plug is built to stand the test of rain and harsh weathers. Please place the plug as least 2 feet off the ground with the plug pointing straight down to avoid water damage.
- FLEXIBILITY: Sync remote outlets together regardless of frequency differences, and expand your system with any of our HBN Remote Control Outlet kits.
- SIMPLE CONVENIENCE: Use the remote or the outlets themselves to turn your appliances on and off. Great with almost any electronic device, including lights, air conditioners, heaters, audio sound systems, holiday decorations, and charging devices.
- SAFE AND RELIABLE: Outlets will remain off after a power outage to save energy and protect your appliances. Ratings: 125V, 15A/1875W Resistive, 5A/625W Tungsten, 1/2HP
Control your outdoor appliances with the HBN Outdoor remote control outlets. All of HBN Products are covered by 15-month warranty. Please contact us at [email protected] for warranty information.
2. Etekcity Outdoor Wireless Remote Control Outlet, Weatherproof, 150ft Range Electrical Light Switch, Dual Outlet, Pair Freely, FCC ETL Certified, Black
- CUSTOMIZE YOUR CONTROL: You can pair multiple Etekcity ZAP 1FX outlets to one remote, even one button or pair multiple remotes to one Etekcity ZAP 1FX as well. One remote allows you to power the household appliances, room lights, fountain pump, patio and yard lights all at the same time. Note: The 2 outlets can’t be controlled individually
- POWER THROUGH ANY WEATHER: Durable water-resistant IPX4 and UV-proof materials allow this remote outlet to work through the toughest weather conditions
- STRONGER 150FT RF SIGNAL: Strong RF signal works through furniture, doors and walls without interfering with other electronics. Operates within a 150-foot line of sight
- FULLY PROTECTION FOR APPLIANCES: Features UV conformal coating, water resistant material, short-circuit protection and overload protection for safe use
- GO GREEN TO SAVE GREEN: Helps eliminate wasteful energy usage at home. Comes with 1-year warranty & lifetime support from Etekcity customer service. FCC and ETL-certified. ZAP 1FX outlets are recoverable that if they occur any incident mentioned above, you can restart them after 10 minutes
3. Woods 50125WD Outdoor Indoor Wireless Remote Control Outlet Kit, Electrical Plug In Remote Light Switch, Features 1 Grounded Outlet with a Pairable Remote, CSA Rated, FCC Compliant, Black
- 【OUTDOOR WIRELESS REMOTE-CONTROL OUTLET】Great for outdoor lighting and décor to deliver convenience of not going outside on cold or hot days to turn on lights or decor
- 【WEATHERPROOF】Designed to stand up to the elements when used correctly outdoors, Features a 6″ 14/3 cord, larger than the 16/3 on some competitors, and two mounting holes for improved stability.
- 【 100 FT RANGE 】 Strong, FCC tested, signal works through walls and doors without any interference
- up to 100ft range in open areas
- does not require line of sight between the remote controller and receiver with the ON( -))/ Off (O) button
- 【HASSLE FREE】Quick plug and sync setup allows you to pair to more than one receiver and remote. Simply plug in, turn on the outlet, hold the power button until the light blinks, click a button on the remote and you are ready to go.
- 【THE TECHNICAL STUFF】 ,FCC compliant, CSA Listed, Rated 125VAC/15A/1875W, 1250W Tungsten, 1/2HP
4. LoraTap Mini Remote Control Outlet Plug Adapter with Remote, 656ft Range Wireless Light Switch for Household Appliances, No Hub Required, 10A/1100W, White, 5 Years Warranty
- Wall Switch and Portable Remote 2 in 1: This remote switch can mount on the magnetic plate base (fixed with magnet or 3M tape on the back) or place directly on a magnetic surface like fridge and works as a traditional switch, or be taken off and used as a portable remote, which allows you to place it anywhere easy to reach
- Compact Design & Easy to Use: Mini 3 prong grounded single port power adapter with on/off button, energy saving design, blue led light indicator, plug and play, just plug in the outlet socket, you can remotely control the device from anywhere in your house
- Long Range Control: 915Mhz wireless signal strong enough to go through walls and windows, the control ranges up to 100ft/30m(indoor), 656ft(outddor) without interfering other electronics, ideal for hard-to-reach lights or appliances that do not have a switch
- Convenient for Everyone: Simple, app-free control of your devices, easy for the elderly, children and people with limited mobility to use, giving users instant control over lamps, television, router, fan and more with a simple press of a button
- Non-Interference & Memory Function: Each item has its unique ID, each kit is paired by default, several kits can work in one room without signal interference
- LoraTap outlet with memory function, it remains off after a power outage to save energy and your electrical bill
- LoraTap patented product with 5 years warranty, FCC, CE and RoHS certified
No app, No wifi, LoraTap wireless outlet kit allows you to remote control lights, television or any other hard to reach or far away household appliances with a touch of a button from any place of your house. 915Mhz strong RF signal works through doors and walls without interfering with other electronics, you can control lights, radio, fan or coffee maker from the comfort of your bed or sofa.
Multiple wireless switches (up to 10pcs) can pair to one outlet.
Multiple outlets (up to 100pcs) can pair to one wireless switch.
Please note that this kit is not compatible with Amazon Alexa, Google Home or Apple Homekit!
Buttons: 2 Buttons, ON/OFF
Signal Range: Indoor range up to 100ft/30m, outdoor range up to 656ft/200m, depending on local circumstances
Lifetime: over 220 thousand clicks
Battery Type: Panasonic CR2032 (included)
Battery Lifetime: up to 10 years
Switch Dimensions(Dia x H): 2.68 x 0.63 in
Input: 100-250V AC, 50/60Hz
Output: 100-250V AC, 50/60Hz
Maximum Load: 10 Amp
Maximum Power: 1100W
Working temperature: 23°F~104°F(-5°C~40°C)
LED indicator light color: blue
Dimensions(Dia x H): 1.8 x 1.25 in
1 x Outlet
1 x Wireless Switch(Remote Control)
1 x Magnetic Switch Base
1 x Panasonic CR2032 Battery (for remote)
1 x Double-Sided Tape
1 x User Guide
5. GE Wireless Remote Wall Switch Control, No Wiring Needed, 1 Grounded Outlet, White Paddle, Plug-in, Up to 100ft Range, Ideal for Indoor Lamps, Small Appliances, and Seasonal Lighting, 18279, Other
- Wireless control over any outlet, easily control on/off functions of lighting in hard to reach places
- CFL, LED and incandescent compatible
- Decora remote light switch mounts anywhere, mounting bracket provided, no wiring needed
- Great for controlling indoor lighting, lamps, small appliances and seasonal lighting
- Receiver plugs into any standard 120VAC household grounded outlet, controlled device plugs into receiver
- Remote operation up to 100 feet from plug-in receiver
- Manufactured in various codes A, B, C, and D; allows the use of multiple units without interference from other modules.
- NOTE: Please refer to the User Manual before use. This item comes in different frequencies. If you are using more than one switch and they are the same frequency code (A, B, C, D) then the switches will control each other. For individual control, make sure that the frequency code of each switch is not the same
GE Wireless Remote Wall Switch Light Control – No Wiring Needed – 1 Grounded Outlet
- Wireless control over any outlet, easily control on/off functions of lighting in hard to reach places. Great for controlling indoor lighting, lamps, small appliances and seasonal lighting.
- Decora remote light switch mounts anywhere, mounting bracket provided, no wiring needed
- Receiver plugs into any standard 120VAC household grounded outlet, controlled device plugs into receiver. Remote operation up to 100 feet from plug-in receiver
- CFL, LED and incandescent compatible
- Manufactured in various codes A, B, C, and D; allows the use of multiple units without interference from other modules. NOTE: Please refer to the User Manual before use. This item comes in different frequencies
6. Garbage Disposal Switch-Remote control-No Drilling on Sink Top-No Wiring-Stick On Sink Top/Counter Top-Compatible with any Garbage Disposal Unit Under 1 HP
- [Easy To Use]Only 3 steps to install within 30’s.If you buy a traditional Air Switch Kit ,You have to spend almost 1H-2Hs to Drill a hole on sink top and then install wires between air switch and garbage disposals .Save you time and avoid the risk of sharp edges of stainless steel or sharp tools.
- [Save Money ]Eliminates wasteful standby power and reduce energy use
- save on your electric bills
- [Remote Control]Strong RF signal works through doors and walls without interfering with other electronics
- Operating from as far as 100 ft ,in line of sight.3M Strip helps to mount the remote control anywhere. Water-resistance remote control can work with your wet finger
- [Compatible]Rated 120V,5A/600W inductive load. Compatible with those Garbage Disposals Unit whose rated power under 1 HP , just like Waste King Series 1/3HP,1/2 HP ,3/4HP
- InSinkErator Badger series Series 1/3HP,1/2 HP ,3/4HP Food Waste Disposer
- [Multi-Purpose] This Wireless Switch Kit not only a remote control for garbage disposal, it can also remote control the desk lamp, fans, Christmas lights, fountain, and many other appliances.
A New Way to Control Your Garbage Disposals
Power of Control Use the remote to turn on and off garbage dispose by your finger in anywhere of the kitchen rooms.
Save on your energy bill with the push of a button. Use the wireless outlet to turn off idle appliances, like lights, lamps, televisions, and radios, extending their life by 15% and save 15-30% on energy consumption.
Want to use this outlet to control a desk lamp or fan? Forget that old function, simply reset and teach the outlets and remote the new function. Please follow the steps as below. How to program a remote control transmitter and outlet switch receiver:
Step1: Plug the outlet receiver into a wall outlet and press the ON button to turn it on Step2: Press and hold the programming button on the outlet until the LED indicator begins to flash.
Step3: Release the programming button and then press the button on the remote for several times. Step4: The paring is successful when the LED indicator stops flashing
Note:The outlets are pre-programmed for the immediate use, but the configuration can be customized to meet your needs.
Power Input: 120V/60Hz Power output: 1200W/10A (max) Resistive load
5A/600W Inductive Load Transmission frequency: 433.92MHz
Remote transmitter battery: CR2032 battery 3V Low power consumption: 0.6w
7. YETOR Heavy Remote Control Switch, DC 12V/24V/48V/72V/ 40A relay Light Switch for Anti-Theft Alarms, Security Systems Roller Lind Door,Gate Barriers etc (Two Remote Controls)
- STRONG SIGNAL–Adopts RF technology , signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 328ft with no obstacle.
- High Power Load: With 40A relay of receiver , which can load high-power electrical appliances to ensure long-term stability control.
- [Easy to Use]:Extremely easy to setup, learn, relearn and control(please refer to introduction). Stable and reliable performance, high receive sensitivity.Configuration of two remote controls,more flexible use.
- [Security Control]:Learning code has high-level security for its low repetitive rate and re-learn mode, it can delete the old code and re-learn a new code,when a remote control get lost. So you could always control of it.
- Wide Application:It is mainly used in 12V-72V (industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.).
Problems you may have encountered:
1.Q: Does the live wire and the neutral wire need to be connected to the remote control switch?
2.Q: My remote control will not work after a period of time?
A: Press the remote control once, the red light on the remote control is not on. Please replace the remote control battery (cr2016 3V).
3.Q: When you press the remote control, the switch makes a TI TA sound.
A: This is the sound of normal work.
4.Q: I don’t know how to choose style .
A: First , look at how many volts your device is. For example, home appliance is 110V, you can buy 110-240 items, such as car equipment is 12V, you can buy 12V-72V items.
5.Q: I need multiple controllers to control a switch.
A: Please contact us.
You can contact us by email if you have any problem (if there is a problem with the quality, you can apply for a refund directly ). Of course, I will be patient with your other questions. What worries me most is that you don’t want to communicate with me.
What are the features of the DIY remote control switch?
1.3000W high power, enough to meet the use of an electric water heater and high power pumping unit.
2.100 meters of remote control distance, easy to work in garden square farms and even factories.
3.It only needs to be connected to the circuit, without complicated settings. Ordinary people can complete it.
4.Compact design, you don’t need to take up a lot of space.
2 x remote controls
1 x Switch
1 x Manual
1.Connect the switch to the circuit,No matching remote control
2.Welcome to my shop, please enjoy your shopping . Any problem, contact me please.
8. Makita XCV11Z 18V LXT Lithium-Ion Brushless Cordless 2 Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum, Tool Only
- Powerful BL Brushless motor delivers 57 cfm and 27″ Water Lift of suction using an 18V LXT Lithium-Ion battery (battery not included)
- Filter cleaning system is designed to maintain optimum suction efficiency and longer filter life
- Efficient HEPA filter captures 99. 97% of particulates . 3 microns and larger
- Up to 60 minutes of continuous run time using an 18V LXT Lithium-Ion 5. 0Ah battery BL1850B (battery not included)
- L. E. D. Battery indicator shows charge level for 18V LXT Lithium-Ion battery
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Compact and portable design
- weighs only 10. 1 lbs. with 18V LXT 5. 0Ah battery (battery not included)
- Integrated tethering hooks for increased portability with optional shoulder strap
The 18V LXT Brushless 2 gallon HEPA filter portable wet/dry dust extractor/vacuum, tool only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99. 97% of particulates . 3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water Lift of suction with just one 5. 0Ah battery (sold separately).
9. SMSL T2 Vacuum Tube Headphone Amplifier, Mini Audio HiFi Stereo Integrated Amp
- Low Ground Noise
- There’s no buzzing or ringing when you use our amp! We feature a high-grade microprocessor that controls the relay while its being switched on and off, achieving a low-ground noise power circuit.
- Sophisticated Design
- Our amp is constructed from top of the line, scratch resistant CNC aluminum.(Warm tip:When you use this product for a long time,please do not touch it by your bare hand,it may very hot,but please don’t worry this is a normal phenomenon.)
- High Drive Current
- Our specially designed power output boasts a larger than average drive current.(Note:please know that this headphone amplifier not for intense music)
- Semi-Set Tube Design
- As a safety measure, the high temperature portion of the tube is strategically placed inside of the amp and out of reach.(Please plug the power supply after all the connection been done for safety)
- Small Compact Size & 2 X 6J9 J-Grade Tubes
- The dimensions of our amp are 2.9inX3.5inX1.02in, and you can replace the stock tubes with E180F, 6ж9П, EF861, and 6688 tubes if you wish to be able to cue music.
10. Festool 202097 Bluetooth Remote Control Set For Ct
- Ideal for occasional cleaning tasks without having to change the CT dust extractor from Auto to man mode.
- Start your CT dust extractor with the remote control directly on the suction hose.
- The Bluetooth module Communicates with Festool Bluetooth battery packs. The CT dust extractor is started automatically when the cordless tool is switched on.
- Remote operation via remote Control (included in the set) or via cordless tool (in combination with Bluetooth battery pack)
- The remote control makes it possible to switch on the CT dust extractor directly from the suction hose (simple changeover to cleaning mode, even when the CT dust extractor is in auto mode)
By our suggestions above, we hope that you can found Bluetooth Vacuum Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!