Top 9 Auto Rubber Vacuum Hose

Feature

• Gates Vacuum Tubing – Non-Reinforced 27041 7/64″ X 50′ (ONE PER PKG) (27041)

Feature

• 1/8″ ID Vacuum Line / Windsheild Washer Tubing
• Withstands Heat, Washer Solutions, Oil, Grease
• For Vacuum Operated Accessories, Windsheild Washer, Emission Control Applications
• 6 Foot per Package

Feature

• 1/4″ ID Vacuum Line / Windsheild Washer Tubing
• Withstands Heat, Washer Solutions, Oil, Grease
• For Vacuum Operated Accessories, Windsheild Washer, Emission Control Applications
• 4 Foot per Package

Feature

Feature

• No logo, hose Inside Diameter: 0.12″ (3mm), OD 0.27″ (7mm), Length: 10 Feet Roll
• Made of premium silicone material to ensure strength and durability
• It applies to general purpose air or water transportation in the engine bay
• Broad operation temperature : -76F to 374F (-60C to 190C). 60 PSI Maximum pressure rating
• Heavy wall design gives it the ability to handle extreme pressure

Feature

• Cost-efficient and time-saving alternative to purchasing components separately
• Saves bay time
• helps you keep the hardware you need organized and close at hand
• All pieces available for reorder

Feature

• Inside Diameter: 1/8″ (3mm). Outside Diameter: 9mm.
• Length: 5 Feet (60 Inch). Wall Thickness: 3MM.
• Work pressure: 0.3 to 0.9 MPA.
• Min temperature: -40 C. Max temperature: 220 C/428 F.
• Bursting Pressure: 2MPA.

Feature

• Hose – Vacuum – 5/32 in ID – 5 ft – Rubber – Black – Each

Feature

• PREVENT VACUUM LEAKS: Use the ABN Rubber Vacuum Cap 115-Piece Assortment Set – Automotive Carb Line & Hose Caps Kit for Carburetor, Manifold, & More to cap lines and hoses while testing carburetors, manifolds, emission control systems, vacuum lines, and more
• They provide a tight fit to prevent vacuum leaks
• 10 SIZES: Vacuum cap sizes measured from the inner diameter (ID) and will fit on the corresponding tubing outer diameter (OD)
• (15) 1/8” W x 9/16” L (3x14mm), (15) 3/16” W x 9/16” L (5x14mm), (10) 3/16” W x 1-1/4” L (5x30mm), (15) 1/4” W x 9/16” L (6x14mm), (10) 1/4” W x 1-1/4” L (6x30mm), (10) 5/16” W x 9/16” L (8x14mm), (10) 5/16” W x 1-1/4” L (8x30mm), (10) 3/8” W x 1” L (10x25mm), (10) 3/8” W x 1-1/2” L (10x38mm), (10) 1/2” W x 11/16” L (12x18mm)
• BUILT TO LAST: Constructed from Ethylene Propylene Diene Monomer (EPDM) rubber for more strength, longevity, and resistance to rust and corrosion compared to unreliable and inflexible plastic caps that easily break in unfavorable weather conditions
• EASY STORAGE: Transparent 10.75” x 7.25” x 1.25” inch (27.3cm x 18.4cm x 3.2cm) clear plastic carrying case for easy transportation, safe storage, and quick organization
• (12) 1.6” x 3.4” inch (4.1cm x 8.6cm) divided compartments that contain 10 different sizes
• Size chart is included
• PACKAGE CONTENTS: Package includes (115) vacuum caps – 1/8” x 9/16” (3x14mm), 3/16” x 9/16” (5x14mm), 3/16” x 1-1/4” (5x30mm), 1/4” x 9/16” (6x14mm), 1/4” x 1-1/4” (6x30mm), 5/16” x 9/16” (8x14mm), 5/16” x 1-1/4” (8x30mm), 3/8” x 1” (10x25mm), 3/8” x 1-1/2” (10x38mm), 1/2” x 11/16” (12x18mm) + (1) storage case for your convenience