The Best Air Vacuum Pump 12Vlt

This vacuum pump has long lifetime low noise and high pressure. This pump operates at 12V and has enough suction for most small projects.
1.Attainable Vacuum :-70KPA
2.Maximum pressure : 250 KPA
3.Working pressure range :-70KPA-250KPA
4.Rated Voltage : 12Vdc
5.Drive by: Motor
6.Life: 500 hours
7.Type: Diaphragm
8.Function: Duty circle when pumping air
9.Continously working hour: 5 hours
NOTE: You may see sparks coming from the motor brush inside the housing, it’s normal. It causes by friction, sparks will be less after a few times of working

Performance Data:
◎Type: DC12V Mini Vacuum Pump;
◎ Operating Voltage: DC9V ~ 14V ;
◎ Rated Voltage: DC12V ;
◎ Positive Pressure: ＞500mmHg;
◎ Negative ≤-620mmHg;
◎ Rated Current: ＜850mA ;
◎ Rated Power: 6Watt;
◎ Suction Capacity: 8L/Min;
◎ Inlet diameter:6mm;
◎ Outlet diameter: 6mm;
◎ Vacuum Degree: 66Kpa ;
◎ Maximum Pressure: 120Kpa;
◎ Noise:<60db;>
◎ Size: As Picture Shows;
◎ Color: As Picture Shows;
◎ Package Include:
1 x Micro Vacuum Pump

Dorman offers 100 percent new mechanical vacuum pumps. Radial ball bearing design provides greater load capacity for improved durability. The unit creates vacuum to operate various accessories throughout the vehicle.

Product Name: EPAuto 120W Portable Tire Inflator/ Air Compressor

Important Information before your Purchase

It is for 12 Volt DC ONLY. Equipped with 12V-DC Cigarette Lighter Socket Plug”, NOT 110V AC plug
DO NOT SUPPOT 24 Volt.

Specification:

Working voltage: DC12V
Rating power: 120W
Inflating Speed: 1.06 CFM
Min. Amp: 10 Amps
Maximum Amp: 15 Amps
LED flashlight: Bright Torch
Maximum Working Pressure 70 PSI
Display Units: KPA, PSI, BAR, KG/CM
The power cable is with a 15 amps fuse, and there is a backup fuse in the package.
Overheat protector will shut of the unit when it exceeds 167°F
CE certified

Operating Instructions:

1. Make sure the power switch is at OFF position and the vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire’s valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM). Press (-) or (+) button to set the desired pressure, and then wait until it stops flashing.
5. Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power.

Valve connector detaching with desired pressure:

When you detach the valve connector, the tire valve would keep releasing air until the connector is fully detached. It’s normal and can be accepted by setting up desired psi value on the machine. For example when you set 32 psi, the machine will keep pumping to 32.5 psi before it stops which consider the loss will be happening when you detach the valve connector.

Robinair’s No 15600 CoolTech 2-stage rotary vane design vacuum pump features a 6 CFM free air displacement along with the power and capacity needed for a wide range of service applications. This high-performance unit includes a heavy duty, 1/2 HP, 115V/60Hz thermally protected motor that delivers high torque for easy startup and efficient operation. Factory rated to 15 microns, this unit delivers a fast, thorough evacuation. Offset rotary vanes build powerful compression within the pumping chamber – reducing pressure and vaporizing moisture. Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn’t cause condensation. Iso-Valve isolates pump from system with just a quarter turn. Durable molded polycarbonate base improves pump balance and minimizes vibration while in operation. Also includes: 1/4″, 3/8″ and 1/2″ male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir. Thoughtful design and robust construction ensure this UL approved unit will deliver the high-performance professionals demand. Robinair CoolTech vacuum pumps are designed for use on A/C-R systems using CFCs, HCFCs, and HFCs in conjunction with mineral oil, ester oil, alkylbenzene oil, and PAG oil as lubricants. Not for use with ammonia or lithium bromide systems; not for use with flammable refrigerants. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.