579 reviews analysed
1. DryPro Waterproof Vacuum Sealed Half Arm Cast Cover, Large
Feature
- Surgical Latex
- Made in US
- It is IMPORTANT to follow sizing instructions. Vacuum seal will not work unless the opening of the cover fits tight around the skin above the cast.
- Circumference: 13″ & Up (33cm+)
- Length: 23.5″ (60 cm),If the cover is too long simply bunch up the extra material and pump out all the air. The extra latex will shrink down and conform to the shape of the users arm removing all extra length.
- Instructions – Slip it on: Stretch the Dry Pro over the arm cast (sometimes easier to put a sock/stocking on first). Make the vacuum seal – Pump out the air using the removable hand pump that is included. Take it off – Let the air back in by lifting the Dry Pro from the skin, releasing the vacuum seal and sliding it off
- Watch the video at the top for sizing help
- WARNING – Do not use if unable to create a snug vacuum seal.
Description
Completely waterproof, patented vacuum sealed protection for below-the-knee casts and wounds. Bathe, shower, or even swim without worry of infection or damage to your cast or leg wound! The special non-skid grid protects the sole and helps prevent slipping.
1. Slide the product over your foot and lay it flat against your leg about 2 inches above where your cast or wound ends. Do not seal the cover directly on the knee. Wear only above or below the knee.
2. Use the hand pump to squeeze all the air our from the product, to create the vacuum seal.
3. Remove the hand pump and close the valve. You are now waterproof!
4. When you are done using the DryPro, simply lift up the cuff to let the air back in. The cover then easily slides back off.
TO FIND YOUR SIZE:
1. Measure the circumference of your leg 2″ above where the cast or wound ends. DO NOT measure on the cast.
2. Measure length from back of heel to top of the cast or wound. The length is to ensure that the cover is long enough. No worries if the cover is too long. You can bunch of the extra material in the middle of the leg, and it will vacuum seal against the leg once you remove the air.
The DryPro cover is used to protect casts and wounds from getting infected by water, bacteria and debris.
2. DryPro Waterproof Vacuum Sealed Half Leg Cast Cover, Small
Feature
- Surgical Latex
- Made in US
- It is IMPORTANT to following sizing instructions. Vacuum seal will not work unless the opening of the cover fits tight around the skin above the cast.
- Circumference: 10″- 13″ (25-33 cm). HL-13
- Length: 21″ (53 cm) ** If the cover is too long simply bunch up the extra material and pump out all the air. The extra latex will shrink down and conform to the shape of the users leg removing all extra length.
- Safe in saltwater and freshwater environments
- Completely waterproof
- bathe, shower, and swim
- Watch the video at the top for sizing help
- WARNING – Do not use if unable to create a snug vacuum seal.
- Made in the USA
- Applying hosiery over the cast will allow the cover to slide easily.
3. Central Vacuum Hose Cover – 35-37 ft – Paded Machine Washable Universal Cover
4. DryPro Waterproof Vacuum Sealed Full Arm Cast Cover, Small
Feature
- Surgical Latex
- Made in US
- It is very important to follow sizing instructions before using. Measuring is highly recommended!
- Circumference: 6.75″-8.75″ (17-22 cm). Completely Submersible Even for Swimming
- Length: 23″ (58 cm) ** If the cover is too long simply bunch up the extra material and pump out all the air. The extra latex will shrink down and conform to the shape of the users leg removing all extra length. **
- Model : FA-14
- Made in the USA. Durable Surgical Rubber that Won’t Rip or Tear
- Fits small children.
- WARNING – Do not use if unable to create a snug vacuum seal.
Description
Completely waterproof patented protection for above-the-elbow casts and wounds. Comes with pump to create a vacuum-seal. Once air is removed, dry pro can’t be taken off unintentionally and water can’t get inside. Bathe, shower or swim without worry of infection or damage to your cast or other arm wound. It is extremely important to measure before following size chart. Fits small children. Applying hosiery over the cast will help with sliding the cover on. Watch the video at the top for sizing help. WARNING – Do not use if unable to create a snug vacuum seal. Measuring circumference – measure the circumference of the arm 2 inches above the cast. If the end of the if the cast is very close to the elbow, then measure mid-bicep. Do not measure around the cast. Only measure around the skin of the arm above the cast.
5. DryPro Waterproof Vacuum Sealed Full Leg Cast Cover, X-Small
Feature
- Surgical Latex
- Made in US
- It is IMPORTANT to following sizing instructions. Vacuum seal will not work unless the opening of the cover fits tight around the skin above the cast.
- Circumference: 7.75″-11″ (19-28 cm)
- Length: 19″ (48 cm) ** If the cover is too long simply bunch up the extra material and pump out all the air. The extra latex will shrink down and conform to the shape of the users leg removing all extra length. **
- FL-12
- Fits small children
- WARNING – Do not use if unable to create a snug vacuum seal. Covers too tight can also cause discomfort. For sizing questions, please call 910-791-0009. Watch the video at the top for sizing help
Description
Completely waterproof, patented vacuum sealed protection for below-the-knee casts and wounds. Bathe, shower, or even swim without worry of infection or damage to your cast or leg wound! The special non-skid grid protects the sole and helps prevent slipping.
1. Slide the product over your foot and lay it flat against your leg about 2 inches above where your cast or wound ends. Do not seal the cover directly on the knee. Wear only above or below the knee.
2. Use the hand pump to squeeze all the air our from the product, to create the vacuum seal.
3. Remove the hand pump and close the valve. You are now waterproof!
4. When you are done using the DryPro, simply lift up the cuff to let the air back in. The cover then easily slides back off.
TO FIND YOUR SIZE:
1. Measure the circumference of your leg 2″ above where the cast or wound ends. DO NOT measure on the cast.
2. Measure length from back of heel to top of the cast or wound. The length is to ensure that the cover is long enough. No worries if the cover is too long. You can bunch of the extra material in the middle of the leg, and it will vacuum seal against the leg once you remove the air.
The DryPro cover is used to protect casts and wounds from getting infected by water, bacteria and debris.
6. ThisWorx for TWC-01 Car Vacuum
Feature
- ★ CLEAN YOUR CAR LIKE A PRO – Save time and money and get professional results yourself every time
- ★ STRONG SUCTION – The car vacuum’s powerful 106w motor and strong metal turbine leave nothing behind
- ★ EXTENDED REACH CAPABILITY – Reach every spot with the 16ft long power cord, elastic hose and nozzle set
- ★ ERGONOMIC DESIGN – The in-car vacuum cleaner features a trash container and lid that shuts off to prevent your trash from falling out. And because the trash container is transparent it lets you know when it’s full, ideal for both wet and dry dirt
- ★ 100% RISK-FREE SATISFACTION GUARANTEE – This portable vacuum cleaner for cars is equipped with 3 different nozzles to meet a gamut of cleaning needs. Along with your handheld car vacuum cleaner, your order comes with a carry bag to conveniently store and take along everything you need, and additional HEPA filter
Description
Whether you are having a hard time removing the food that fell in between your seats or you are an UBER driver who needs to keep your car clean for passengers, ThisWorx portable car vacuum cleaner is for you! ThisWorx gets all of the dirt from everyday messes and outdoor adventures quickly and effortlessly.
ThisWorx Portable Vacuum Cleaner for Car
- Keep a sharp, clean interior and never have food crumbs, dust or dirt rotting your car again!
- This car vac is a great solution for parents with young children, taxi/Uber/Lyft drivers who want to keep a clean car for passengers, and other car owners for general routine vacuuming!
- Works effectively for both wet and dry dirt and even gets your ashtray.
- Get rid of germs, bacteria and other allergens that might be harboring on your car seats, backrest or carpets by vacuuming your car regularly.
- Offers strong, non-bulky suction for the best maneuverability thanks to the 106W motor and metal turbine.
- 16 feet power cable reaches every corner of even BIG cars!
- Generous capacity of the transparent trash container, auto-shut-off lid, and design for maximum ease of use.
- Washable HEPA filter design makes vacuum maintenance extremely easy and convenient.
- Small cleaning brush included so you never have to get your hands dirty while cleaning your HEPA filter!
PACKAGE CONTENTS:
- Car Vacuum Cleaner
- Long elastic hose (compatible with other nozzles)
- Narrow plastic tube nozzle
- Brush nozzle (excellent for removing pet hair from fabric!)
- Carry bag for easy storage
- Small cleaning brush
- HEPA filter
- Owners manual
So, what are you waiting for?
ORDER NOW and get your new handheld car vacuum delivered in just 2-3 days!
Please note: Engine needs to be started before a car cleaning
7. Bloccs Child Full Arm Waterproof Cast Cover (8 – 10 years)
Feature
- AWARD WINNING WATERPROOF PROTECTOR – Bloccs are designed to cover casts or dressings with a smooth skin-tight waterproof seal.
- SIZING GUIDE – To choose the most suitable size please refer to the sizing chart Images. Age ranges are for guidance only Length: 95cm/37.5in Circumference: From 50-80cm/19-32in
- SWIMMING, SHOWERING & BATHING – specifically designed to be fully submergible, with totally watertight protection for plaster casts, dressings and bandages.
- ADULT & KID SIZES AVAILABLE – enabling adults and children with ARM, HAND, LEG or FOOT injury to swim, shower or bathe without getting it wet. GREAT FOR VACATION – Why not order 2 protectors, 1 for the shower & the other 1 for the pool, lake or beach.
- WINNER – of the 2016 ‘Queen’s Award for Enterprise: Innovation’. Manufactured in the UK. REUSABLE protector made from soft and flexible rubber.
8. 2 Standard White Inlet Valves for Beam Central Vacuum
Feature
- Includes 2 Central Vac White Inlet Valve Round Door Covers Fits Beam Central
- Vac units Low Voltage Connections for starting the vacuum power unit Most Common
- inlet valves used Inlet opening measures 1.5“ and has 2 electrical contacts
- inside the port Please contact us with any questions or to confirm fit Product
- Description Free Shipping on all US orders! Free Shipping on all US orders!
Description
Includes 2 Central Vac White Inlet Valve Round Door Covers Fits Beam Central Vac units Low Voltage Connections for starting the vacuum power unit Most Common inlet valves used Inlet opening measures 1.5“ and has 2 electrical contacts inside the port Please contact us with any questions or to confirm fit
9. Hayward SP1106 Skim Vac In-Ground Pool Skimmer
Feature
- Large skimmer vacuum plate with 1-1/2-inch straight adapter
- Fits Hayward swimming pool skimmer SP1082, 1084, 1085, 1075 models
- By utilizing the skimmer basket instead of the pump strainer basket, the need to turn the pump on and off is eliminated
- Simply attach the appropriate Skim-Vac to the vacuum hose located over the skimmer basket and begin vacuuming
- Measures 8-inch diameter
10. PoolSupplyTown Free Rotation Pool Vacuum Vac Lock Safety Wall Fitting for Suction Pool Cleaner Replaces Hayward W400BWHP & Pentair GW9530
Description
The Vacuum / Vac Lock is a safety mechanism designed with a spring action cover which holds the pool cleaner hose in place and will snap close the suction fitting automatically when not in use. It can be used with all suction pool cleaners such as the Hayward Pool Vac, Navigator, Baracuda, Kreepy Krauly and many other suction pool cleaners. ***Installation instruction: 1. Add silicone sealant to 1 1/2″ male threads and hand turn into 1 1/2″ female thread wall fitting already installed in the pool. This fitting will be connected to the suction side of the plumbing system with a 3-away or ball valve at the equipment to adjust the flow rate. 2. Thread into wall fitting as far as you can AND with the “arrow marking” pointing up. the spring will be on top. 3. Anchor set screw. 4. Use screwdriver to open flap and then insert vacuum/pool cleaner hose. “Clip” inside flap will help hold vacuum/pool cleaner hose to wall fitting when pump is turned off. 5. When not in use make sure cover flap has been snapped firmly in place. 6. NEVER operate a pool/spa with an uncovered suction outlet or vacuum port.***
Conclusion
By our suggestions above, we hope that you can found Cover For Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!