Top 6 500W Heating Element Inner Hole

Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

2_Pack Available at $57 (Check SIZE: LRS-350-24:2_PACK)
-CONDITION: 100% Brand New
-DC VOLTAGE: 24V
-CURRENT RANGE: 0~14.6A
-RATED POWER: 350W
-INPUT VOLTAGE RANGE: 90 ~ 132VAC / 180 ~ 264VAC by switch 240 ~ 370VDC (switch on 230VAC)
-EFFICIENCY: 88%
-PROTECTIONS: SHORT CIRCUIT / OVER LOAD / OVER VOLTAGE / OVER TEMPERATURE
-WEIGHT:760g
-DIMENSION: 215 x 115 x 30 mm
-CASE MATERIAL: Metal case / Aluminum base
-CERTIFICATE: UL/CB
-WORKING TEMPERATURE: -25~70℃
CASE temperature>50℃ FAN ON, CASE temperature<40℃ fan="" off="">

The MCH (metal ceramics heater) heating element is made by the following process. First, painting the high melting point metal (tungsten or molybdenum manganese) paste on to the Al2O3 casting briquette in coordinate to the circuit design, then another layer of sintering additives. After that, repeating the process to build multiple layers. Then, they are sintered together under 1600 °C hydrogen gas environment. Finally, nickel leads are brazed at 800 °C onto the metal end and put on with Teflon sleeve, which make it a MCH heating element. It is a new type of high efficient heating elements, which can save more than 20%-30% power effect compare to PTC ceramic heaters. Our alumina ceramic heaters have many excellent features that do not exist in the sheath heaters: 1. High power density, excellent thermal efficiency 2. Rapid heating, non-hotspot temperature distribution 3. High temperature, small size, light weight 4. Excellent insulation (the leakage current is < 0.5="" ma="" under="" voltage="" 4500v/1s="" testing="" with="" no="" breakdown)="" 5.="" high="" reliability,="" stable="" resistance,="" no="" electric="" noise="" 6.="" good="" chemical="" resistance="" 7.="" full="" compliance="" with="" eu="" rohs="" (no="" lead,="" cadmium,="" mercury,="" hexavalent="" chromium,="" pcbs,="" and="" other="" harmful="" substances)="" 8.="" no="" charge="" on="" surface="" and="" safe="" to="" touch.="" the="" mch="" is="" widely="" used="" in="" all="" kinds="" of="" applications="" nowadays,="" such="" as:="" intelligent="" bidet="" seat,="" electric="" water="" heater,="" medical="" machine,="" dryer,="" electric="" heating="" splint,="" electric="" iron,="" vacuum="" flask,="" electric="" cooker,="" electric="" bonder,="" capper,="" utr="" cylinder="" condensation-proofer,="" ir="" physiotherapy="" equipment,="" intravenous="" injection="" heating,="" quick="" food="" heating,="" mini="" thermostatic="" bath="" for="" special="" crystal="" parts,="" automatic="" exhaust="" oxidation="" sensors,="" industrial="" equipment="" heater,="" and="" small="" heating="" appliance,="" etc.="" meanwhile,="" it="" is="" also="" perfect="" for="" scientific="" research="" in="" lab="" environment="" due="" to="" its="" small="" size,="" high="" power="" density,="" high="" temperature="" and="" excellent="" insulation.="">

Product Description

This kit replaces the inner coils of your dryer’s heating element assembly.

From the Manufacturer

This kit replaces the inner coils of your dryer’s heating element assembly.

The JBJ True Temp Titanium Replacement Heating Element Only, 500W, is just the heating element. The probe, controller and magnets are not included. This is a replacement part, but if you already have a temperature controller and a probe this might be a good choice.

New and Improved 500 Watts Bulbs/Heating Elements 1500 Watts with 3 bulbs/heating elements These new improved bulbs/heating elements have been lab tested for double life expectancy (15000-20000 hours) than the original bulb (8000-10000 hours). Total value for this set is $198 These bulbs/heating elements are compatible with the following models: A4428 EdenPURE GEN4 A4428/RTL EdenPURE GEN4 GEN4 GEN4A4643/RTL USA1000 US1000 Personal Heater PersonalA4887/RTL Space Saver USA1000A4188/RTL