901 reviews analysed
1. High Performance Silicone Vacuum Tubing Hose, ID 0.12" (3mm), OD 0.27" (7mm), 10 Feet per roll (3 Meter), Black 60 psi Maxium Pressure
Feature
- No logo, hose Inside Diameter: 0.12″ (3mm), OD 0.27″ (7mm), Length: 10 Feet Roll
- Made of premium silicone material to ensure strength and durability
- It applies to general purpose air or water transportation in the engine bay
- Broad operation temperature : -76F to 374F (-60C to 190C). 60 PSI Maximum pressure rating
- Heavy wall design gives it the ability to handle extreme pressure
Description
Made of High Temp Premium Grade Silicone. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
2. HPS HTSVH3-BLKx10 Black 10′ Length High Temperature Silicone Vacuum Tubing Hose (60 psi Maxium Pressure, 1/8" ID)
Feature
- Hose Inside Diameter: 1/8″ (3mm). Length: 10 Feet Roll
- Made of High Temp Premium Grade Silicone. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
- Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system
- Heavy wall design gives it the ability to handle extreme pressure
- UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
3. Pico 5161PT 1/8" ID Vacuum Line Tubing 6′ Per Package
Description
Tubing withstands heat, washer solutions, oil and grease.Ideal for windshield washer, vacuum operated accessories and emmission control applications.Operating temperature -40F to 212F.
4. Durable Norprene Blended Rubber/Plastic Tubing, Rated for Vacuum, Flexible, Black, Opaque, 61A Durometer, 1/8" ID, 1/4" OD, 1/16" Wall, 10′ Length
5. ATP Nylochem Nylon Plastic Tubing, Black, 5/64" ID x 1/8" OD, 100 feet Length
Feature
- Nylon 12 is strong, lightweight and has a very low moisture absorption rate compared to other nylons
- Nylon tubing offers a thinner tube wall providing higher flow rates and working pressure
- Nylon tubing can be used with standard push-to-connect fittings and compression fittings for simple installation
- Abrasion resistant, heat resistant and chemical resistant
- Measures 5/64-inches inside diameter by 1/8-inches outside diameter by 100-feet total length
Description
ATP Nylochem nylon tubing is recognized as an industry standard for applications which require higher working pressures and higher heat and/or chemical resistance than our polyurethane tubing. Nylon 12 is strong, lightweight and has a very low moisture absorption rate compared to other nylons. By not absorbing moisture, nylon 12 will remain more flexible, which in turn extends it’s service life. Nylon tubing can be used with standard push-to-connect fittings and compression fittings for simple installation. Because of it’s semi-rigid properties, nylon tubing offers a thinner tube wall providing higher flow rates and working pressure. 420 psi working pressure at 70 degrees F. Applicable for pneumatic tools, pneumatic piping, instrumentation, lube lines, coolants, refrigeration, chemical transfer, vacuum, process control, fuel lines, paint supply lines, laboratories. Measures 5/64-inches inside diameter by 1/8-inches outside diameter by 100-feet total length. Available in black color.
6. Utah Pneumatic Air Line 1/4" Od 32.8 Feet 10 Meters SAEJ844 Air Brake Tubing Nylon Air Ride Hose DOT Approved for Air Brake System Or Fluid Transfer(Nylon Tube 1/4)
Feature
- Standard SAEJ844 Tubing Suspenion Horn Train Lowrider air brake tubing 1/4″ air line
- Working Pressure 2.5Mpa. Burst Pressure 6.3Mpa nylon air brake tubing
- Item:PA Nylon hose. Usage:Air brake system,air or fluid transfer use with brake hose fitting
- Size:1/4″.Pipe Thickness 1mm Bending radius 40mm air horn tubing
- Weight 190Gr/10Meter.Material Polyamide air bag hose
7. HBD 3341 7/32" x 50′ EMW0082373
8. Tygon Non-DEHP Laboratory, Food & Beverage and Vacuum Plastic Tubing, Clear, 1/16" ID x 1/8" OD, 50 feet Length
Description
Saint-Gobain has developed Tygon E-3603 using entirely bio-based plasticizers. Crystal clear and flexible, long-lasting and crack-resistant, the new Tygon E-3603 non-DEHP tubing delivers the same superior performance you have come to expect, but now in a formulation that contains a non-DEHP plasticizer. Replacing DEHP with a bio-based, non-phthalate plasticizer delivers the benefits of increased sustainability and safety for the environment and users. Tygon E-3603 Tubing handles most inorganic chemicals found in the laboratory. It is non-oxidizing and non-contaminating, and less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup to facilitate cleaning, and coils are marked at 1-foot (30.4-centimeters) intervals for easy measuring. Tygon E-3603 Tubing is specially formulated for resistance to flex-fatigue and abrasion. In many peristaltic pump applications it will outlast the competitor and the original R-3603 by 3 to 1. As a tubing for instrumentation connection, vent, drain and other general laboratory applications, Tygon E-3603 Tubing offers superior life, which minimizes the labor and expense of replacement. New bio-based formulation delivers the same excellent performance. Outstanding chemical resistance. Lot-to-lot consistency for reproducible results. Non-oxidizing and non-contaminating. Contains no BPA or phthalates. Smooth, polished inner wall. Slips easily over fittings and grips securely for simple lab set-ups. Meets USP Class VI and FDA criteria. Typical applications: general laboratory, food and beverage, biopharmaceutical, analytical instruments, peristaltic and vacuum pumps, ideal for condensers, incubators, desiccators, gas lines and drain lines. 56 Durometer hardness (Shore A), 15s. 1750 psi (12.1MPa) Tensile strength. 425 percent ultimate elongation. Tear resistance, 173 pounds-feet/inch (31 kN/m). 1.21 Specific gravity. Water absorption, 0.21 percent 24 hrs. at 73 degrees F (23 degrees C).
9. I33T High Performance Silicone Vacuum Tubing Hose 15 Feet Length per reel (4.5 Meter), ID 3mm (1/8 inch), OD 8mm Blue
Feature
- Size: Inner Diameter 0.12 Inch (3mm)
- Outer Diameter 0.31 Inch (8mm)
- Length 15 Feet (4.5 Meter)
- Wall thickness 2mm
- Broad operation temperature: -76F to 374F (-60C to 190C). 60 PSI Maximum pressure rating
- Reinforcement: made of high temperature premium grade silicone rubber
- Material stability: handle extreme pressure
- Ultra flexible and excellent tensile strength
- Applicability: applies to general purpose air or water transportation in the engine bay
Description
Product appearance: inside and outside wall is smooth; this product is 1/8 inch silicone tubing (1/8 inch silicone tube)
I33T product line: include general car silicone hose, different types of radiator tube, Coupler & Turbo intercooler pipe, Intake piping, etc.
I33T Brand introduction
I33T Silicon Hose Store is a universal automotive silicone hose manufacturers, and have 15 years production experience.
We provide high quality manually 3/4 layers of silicone products, and customize universal automotive (racing car & refitted car) replacement parts. Our products include general car silicone tube, different types of radiator silicone tube, Coupler & Turbo intercooler pipe, etc.
Universal 3mm Vacuum hose black size is 1/8 vacuum hose automotive (1/8 inch vacuum line)
1/8 inch vacuum tube, Our silicone hose kits are designed with your engines cooling as a top priority, products match SAEJ20 industry standards.
1/8 vacuum line (1/8 vacuum tubing), I33T high performance handicraft silicone hose is made with high-grade silicone and a dual layer, that consists of heat resistant fibers, increased pressure tolerance; resistance to UV, water, oil, fuel, heat reductions and a life time expectancy of the hoses.
Our specific combination of silicone compounds and fabrics to deliver the required performance, reliability strength and flexibility required, improves the flow of engine cooling system and upgrades the performance.
10. HPS HTSVH35-BLKx10 Black 10′ Length High Temperature Silicone Vacuum Tubing Hose (60 psi Maxium Pressure, 3.5mm ID)
Feature
- Hose Inside Diameter: 3.5mm. Length: 10 Feet Roll
- Made of High Temp Premium Grade Silicone. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
- Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system
- Heavy wall design gives it the ability to handle extreme pressure
- UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
Conclusion
By our suggestions above, we hope that you can found 18 Inch Vacuum Tubing for you.Please don’t forget to share your experience by comment in this post. Thank you!